diff --git a/spring-boot-docs/src/main/asciidoc/appendix-application-properties.adoc b/spring-boot-docs/src/main/asciidoc/appendix-application-properties.adoc index e4dd924a25..0b12cf04af 100644 --- a/spring-boot-docs/src/main/asciidoc/appendix-application-properties.adoc +++ b/spring-boot-docs/src/main/asciidoc/appendix-application-properties.adoc @@ -27,620 +27,637 @@ content into your application; rather pick only the properties that you need. # CORE PROPERTIES # ---------------------------------------- - # BANNER - banner.charset=UTF-8 # banner file encoding - banner.location=classpath:banner.txt # banner file location + # BANNER + banner.charset=UTF-8 # Banner file encoding. + banner.location=classpath:banner.txt # Banner file location. # SPRING CONFIG ({sc-spring-boot}/context/config/ConfigFileApplicationListener.{sc-ext}[ConfigFileApplicationListener]) - spring.config.name= # config file name (default to 'application') - spring.config.location= # location of config file + spring.config.location= # Config file locations. TODO + spring.config.name=application # Config file name. # PROFILES - spring.profiles.active= # comma list of <> - spring.profiles.include= # unconditionally activate the specified comma separated profiles + spring.profiles.active= # Comma-separated list of <>. + spring.profiles.include= # Unconditionally activate the specified comma separated profiles. # APPLICATION SETTINGS ({sc-spring-boot}/SpringApplication.{sc-ext}[SpringApplication]) - spring.main.sources= # sources (class name, package name or XML resource location) to include - spring.main.web-environment= # detect by default - spring.main.show-banner=true - spring.main.banner-mode=console # mode used to display the banner when the application runs (console, off, or log) - spring.main....= # see class for all properties + spring.main.banner-mode=console # Mode used to display the banner when the application runs. + spring.main.sources= # Sources (class name, package name or XML resource location) to include in the ApplicationContext. + spring.main.web-environment= # Run the application in a web environment (auto-detected by default). # AUTO-CONFIGURATION - spring.autoconfigure.exclude= # comma-separated list of auto-configuration classes to exclude + spring.autoconfigure.exclude= # Auto-configuration classes to exclude. # ADMIN ({sc-spring-boot-autoconfigure}/admin/SpringApplicationAdminJmxAutoConfiguration.{sc-ext}[SpringApplicationAdminJmxAutoConfiguration]) - spring.application.admin.enabled=false # enable admin features for the application - spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean + spring.application.admin.enabled=false # Enable admin features for the application. + spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean. # OUTPUT - spring.output.ansi.enabled=detect # Configure the ANSI output ("detect", "always", "never") + spring.output.ansi.enabled=detect # Configure the ANSI output (can be "detect", "always", "never"). # LOGGING - logging.config= # location of config file (default classpath:logback.xml for logback) - logging.exception-conversion-word=%wEx # conversion word used when logging exceptions - logging.file=myapp.log - logging.level.*= # levels for loggers, e.g. "logging.level.org.springframework=DEBUG" (TRACE, DEBUG, INFO, WARN, ERROR, FATAL, OFF) - logging.path=/var/log - logging.pattern.console= # appender pattern for output to the console (only supported with the default logback setup) - logging.pattern.file= # appender pattern for output to the file (only supported with the default logback setup) - logging.pattern.level= # appender pattern for the log level (default %5p, only supported with the default logback setup) - logging.register-shutdown-hook=false # register a shutdown hook for the logging system when it is initialized + logging.config= # Location of the logging configuration file. For instance `classpath:logback.xml` for Logback + logging.exception-conversion-word=%wEx # Conversion word used when logging exceptions. + logging.file= # Log file name. For instance `myapp.log` + logging.level.*= # Log levels severity mapping. For instance `logging.level.org.springframework=DEBUG` + logging.path= # Location of the log file. For instance `/var/log` + logging.pattern.console= # Appender pattern for output to the console. Only supported with the default logback setup. + logging.pattern.file= # Appender pattern for output to the file. Only supported with the default logback setup. + logging.pattern.level= # Appender pattern for log level (default %5p). Only supported with the default logback setup. + logging.register-shutdown-hook=false # Register a shutdown hook for the logging system when it is initialized. # IDENTITY ({sc-spring-boot}/context/ContextIdApplicationContextInitializer.{sc-ext}[ContextIdApplicationContextInitializer]) - spring.application.name= - spring.application.index= + spring.application.index= # Application index. + spring.application.name= # Application name. # EMBEDDED SERVER CONFIGURATION ({sc-spring-boot-autoconfigure}/web/ServerProperties.{sc-ext}[ServerProperties]) - server.port=8080 - server.address= # bind to a specific NIC - server.compression.enabled=false # if response compression is enabled - server.compression.excluded-user-agents= # list of user-agents to exclude from compression - server.compression.mime-types=text/html,text/xml,text/plain,text/css # comma-separated list of MIME types that should be compressed - server.compression.min-response-size=2048 # minimum response size that is required for compression to be performed - server.context-parameters.*= # Servlet context init parameters, e.g. server.context-parameters.a=alpha - server.context-path= # the context path, defaults to '/' - server.jsp-servlet.class-name=org.apache.jasper.servlet.JspServlet # The class name of the JSP servlet + server.address= # Network address to which the server should bind to. + server.compression.enabled=false # If response compression is enabled. + server.compression.excluded-user-agents= # List of user-agents to exclude from compression. + server.compression.mime-types= # Comma-separated list of MIME types that should be compressed. For instance `text/html,text/css,application/json` + server.compression.min-response-size= # Minimum response size that is required for compression to be performed. For instance 2048 + server.context-parameters.*= # Servlet context init parameters. For instance `server.context-parameters.a=alpha` + server.context-path= # Context path of the application. + server.display-name=application # Display name of the application. + server.error.include-stacktrace=never # When to include a "stacktrace" attribute. + server.error.path=/error # Path of the error controller. + server.error.whitelabel.enabled=true # Enable the default error page displayed in browsers in case of a server error. + server.jsp-servlet.class-name=org.apache.jasper.servlet.JspServlet # The class name of the JSP servlet. server.jsp-servlet.init-parameters.*= # Init parameters used to configure the JSP servlet server.jsp-servlet.registered=true # Whether or not the JSP servlet is registered - server.servlet-path= # the servlet path, defaults to '/' - server.display-name= # the display name of the application - server.use-forward-headers= # if X-Forwarded-* headers should be used (default is off unless running in a known cloud) - server.session.persistent=false # true if session should be saved across restarts - server.session.store-dir= # dir used to save session data - server.session.timeout= # session timeout in seconds - server.session.tracking-modes= # tracking modes (one or more of "cookie" ,"url", "ssl") - server.session.cookie.name= # session cookie name - server.session.cookie.domain= # domain for the session cookie - server.session.cookie.path= # path of the session cookie - server.session.cookie.comment= # comment for the session cookie - server.session.cookie.http-only= # "HttpOnly" flag for the session cookie - server.session.cookie.secure= # "Secure" flag for the session cookie - server.session.cookie.max-age= # maximum age of the session cookie in seconds - server.ssl.enabled=true # if SSL support is enabled - server.ssl.client-auth= # want or need - server.ssl.key-alias= - server.ssl.ciphers= # supported SSL ciphers - server.ssl.key-password= - server.ssl.key-store= - server.ssl.key-store-password= - server.ssl.key-store-provider= - server.ssl.key-store-type= - server.ssl.protocol=TLS - server.ssl.trust-store= - server.ssl.trust-store-password= - server.ssl.trust-store-provider= - server.ssl.trust-store-type= - server.tomcat.accesslog.directory=logs # directory in which log files are created - server.tomcat.accesslog.enabled=false # is access logging enabled - server.tomcat.accesslog.pattern= # log pattern of the access log - server.tomcat.accesslog.prefix=access_log # log file name prefix - server.tomcat.accesslog.suffix=.log # log file name suffix + server.port=8080 # Server HTTP port. + server.servlet-path=/ # Path of the main dispatcher servlet. + server.session.cookie.comment= # Comment for the session cookie. + server.session.cookie.domain= # Domain for the session cookie. + server.session.cookie.http-only= # "HttpOnly" flag for the session cookie. + server.session.cookie.max-age= # Maximum age of the session cookie in seconds. + server.session.cookie.name= # Session cookie name. + server.session.cookie.path= # Path of the session cookie. + server.session.cookie.secure= # "Secure" flag for the session cookie. + server.session.persistent=false # Persist session data between restarts. + server.session.store-dir= # Directory used to store session data. + server.session.timeout= # Session timeout in seconds. + server.session.tracking-modes= # Session tracking modes (one or more of the following: "cookie", "url", "ssl"). + server.ssl.ciphers= # Supported SSL ciphers. + server.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store. + server.ssl.enabled= # + server.ssl.key-alias= # + server.ssl.key-password= # + server.ssl.key-store= # + server.ssl.key-store-password= # + server.ssl.key-store-provider= # + server.ssl.key-store-type= # + server.ssl.protocol= # + server.ssl.trust-store= # + server.ssl.trust-store-password= # + server.ssl.trust-store-provider= # + server.ssl.trust-store-type= # + server.tomcat.accesslog.directory=logs # Directory in which log files are created. Can be relative to the tomcat base dir or absolute. + server.tomcat.accesslog.enabled=false # Enable access log. + server.tomcat.accesslog.pattern=common # Format pattern for access logs. + server.tomcat.accesslog.prefix=access_log # Log file name prefix. + server.tomcat.accesslog.suffix=.log # Log file name suffix. + server.tomcat.background-processor-delay=30 # Delay in seconds between the invocation of backgroundProcess methods. + server.tomcat.basedir= # Tomcat base directory. If not specified a temporary directory will be used. server.tomcat.internal-proxies=10\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\ 192\\.168\\.\\d{1,3}\\.\\d{1,3}|\\ 169\\.254\\.\\d{1,3}\\.\\d{1,3}|\\ 127\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\ 172\\.1[6-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\ 172\\.2[0-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\ - 172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3} # regular expression matching trusted IP addresses - server.tomcat.protocol-header=x-forwarded-proto # front end proxy forward header - server.tomcat.protocol-header-https-value=https # value of the protocol header that indicates that the incoming request uses SSL - server.tomcat.port-header= # front end proxy port header - server.tomcat.remote-ip-header=x-forwarded-for - server.tomcat.basedir=/tmp # base dir (usually not needed, defaults to tmp) - server.tomcat.background-processor-delay=30; # in seconds - server.tomcat.max-http-header-size= # maximum size in bytes of the HTTP message header - server.tomcat.max-threads = 0 # number of threads in protocol handler - server.tomcat.uri-encoding = UTF-8 # character encoding to use for URL decoding - server.undertow.accesslog.enabled=false # if access logging is enabled - server.undertow.accesslog.pattern=common # log pattern of the access log - server.undertow.accesslog.dir=logs # access logs directory - server.undertow.buffer-size= # size of each buffer in bytes - server.undertow.buffers-per-region= # number of buffer per region - server.undertow.direct-buffers=false # allocate buffers outside the Java heap - server.undertow.io-threads= # number of I/O threads to create for the worker - server.undertow.worker-threads= # number of worker threads - - # ERROR HANDLING ({sc-spring-boot-autoconfigure}/web/ErrorProperties.{sc-ext}[ErrorProperties]) - server.error.path=/error # the error path - server.error.include-stacktrace=never # when to include a stacktrace attribute (never/always/on-trace-param) - server.error.whitelabel.enabled=true # enable the default error page displayed in browsers in case of a server error + 172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3} # regular expression matching trusted IP addresses. + server.tomcat.max-http-header-size=0 # Maximum size in bytes of the HTTP message header. + server.tomcat.max-threads=0 # Maximum amount of worker threads. + server.tomcat.port-header=X-Forwarded-Port # Name of the HTTP header used to override the original port value. + server.tomcat.protocol-header= # Header that holds the incoming protocol, usually named "X-Forwarded-Proto". + server.tomcat.protocol-header-https-value=https # Value of the protocol header that indicates that the incoming request uses SSL. + server.tomcat.remote-ip-header= # Name of the http header from which the remote ip is extracted. For instance `X-FORWARDED-FOR` + server.tomcat.uri-encoding=UTF-8 # Character encoding to use to decode the URI. + server.undertow.accesslog.dir= # Undertow access log directory. + server.undertow.accesslog.enabled=false # Enable access log. + server.undertow.accesslog.pattern=common # Format pattern for access logs. + server.undertow.buffer-size= # Size of each buffer in bytes. + server.undertow.buffers-per-region= # Number of buffer per region. + server.undertow.direct-buffers= # Allocate buffers outside the Java heap. + server.undertow.io-threads= # Number of I/O threads to create for the worker. + server.undertow.worker-threads= # Number of worker threads. + server.use-forward-headers= # If X-Forwarded-* headers should be applied to the HttpRequest. # SPRING MVC ({sc-spring-boot-autoconfigure}/web/WebMvcProperties.{sc-ext}[WebMvcProperties]) - spring.mvc.locale= # set fixed locale, e.g. en_UK - spring.mvc.date-format= # set fixed date format, e.g. dd/MM/yyyy - spring.mvc.favicon.enabled=true - spring.mvc.message-codes-resolver-format= # PREFIX_ERROR_CODE / POSTFIX_ERROR_CODE - spring.mvc.ignore-default-model-on-redirect=true # if the content of the "default" model should be ignored redirects - spring.mvc.throw-exception-if-no-handler-found=false # if a "NoHandlerFoundException" should be thrown if no Handler was found to process a request - spring.mvc.async.request-timeout= # async request timeout in milliseconds - spring.mvc.view.prefix= # MVC view prefix - spring.mvc.view.suffix= # ... and suffix + spring.mvc.async.request-timeout= # Amount of time (in milliseconds) before asynchronous request handling times out. + spring.mvc.date-format= # Date format to use. For instance `dd/MM/yyyy` + spring.mvc.favicon.enabled=true # Enable resolution of favicon.ico. + spring.mvc.ignore-default-model-on-redirect=true # If the content of the "default" model should be ignored during redirect scenarios. + spring.mvc.locale= # Locale to use. + spring.mvc.message-codes-resolver-format= # Formatting strategy for message codes. For instance `PREFIX_ERROR_CODE`. + spring.mvc.throw-exception-if-no-handler-found=false # If a "NoHandlerFoundException" should be thrown if no Handler was found to process a request. + spring.mvc.view.prefix= # Spring MVC view prefix. + spring.mvc.view.suffix= # Spring MVC view suffix. # SPRING RESOURCES HANDLING ({sc-spring-boot-autoconfigure}/web/ResourceProperties.{sc-ext}[ResourceProperties]) - spring.resources.cache-period= # cache timeouts in headers sent to browser - spring.resources.add-mappings=true # if default mappings should be added - spring.resources.static-locations= # comma-separated list of the locations that serve static content (e.g. 'classpath:/resources/') - spring.resources.chain.enabled=false # enable the Spring Resource Handling chain (enabled automatically if at least a strategy is enabled) - spring.resources.chain.cache=false # enable in-memory caching of resource resolution - spring.resources.chain.html-application-cache=false # enable HTML5 appcache manifest rewriting - spring.resources.chain.strategy.content.enabled=false # enable a content version strategy - spring.resources.chain.strategy.content.paths= # comma-separated list of regular expression patterns to apply the version strategy to - spring.resources.chain.strategy.fixed.enabled=false # enable a fixed version strategy - spring.resources.chain.strategy.fixed.paths= # comma-separated list of regular expression patterns to apply the version strategy to - spring.resources.chain.strategy.fixed.version= # version string to use for this version strategy + spring.resources.add-mappings=true # Enable default resource handling. + spring.resources.cache-period= # Cache period for the resources served by the resource handler, in seconds. + spring.resources.chain.cache=true # Enable caching in the Resource chain. + spring.resources.chain.enabled= # Enable the Spring Resource Handling chain. Disabled by default unless at least one strategy has been enabled. + spring.resources.chain.html-application-cache=false # Enable HTML5 application cache manifest rewriting. + spring.resources.chain.strategy.content.enabled=false # Enable the content Version Strategy. + spring.resources.chain.strategy.content.paths=/** # Comma-separated list of patterns to apply to the Version Strategy. + spring.resources.chain.strategy.fixed.enabled=false # Enable the fixed Version Strategy. + spring.resources.chain.strategy.fixed.paths= # Comma-separated list of patterns to apply to the Version Strategy. + spring.resources.chain.strategy.fixed.version= # Version string to use for the Version Strategy. + spring.resources.static-locations=classpath:/META-INF/resources/,classpath:/resources/,classpath:/static/,classpath:/public/ # Locations of static resources. # MULTIPART ({sc-spring-boot-autoconfigure}/web/MultipartProperties.{sc-ext}[MultipartProperties]) - multipart.enabled=true - multipart.file-size-threshold=0 # Threshold after which files will be written to disk. + multipart.enabled=true # Enable support of multi-part uploads. + multipart.file-size-threshold=0 # Threshold after which files will be written to disk. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size. multipart.location= # Intermediate location of uploaded files. - multipart.max-file-size=1Mb # Max file size. - multipart.max-request-size=10Mb # Max request size. + multipart.max-file-size=1Mb # Max file size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size. + multipart.max-request-size=10Mb # Max request size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size. # H2 Web Console ({sc-spring-boot-autoconfigure}/h2/H2ConsoleProperties.{sc-ext}[H2ConsoleProperties]) - spring.h2.console.enabled=false # Enable the console - spring.h2.console.path=/h2-console # Path at which the console can be accessed + spring.h2.console.enabled=false # Enable the console. + spring.h2.console.path=/h2-console # Path at which the console will be available. # SPRING HATEOAS ({sc-spring-boot-autoconfigure}/hateoas/HateoasProperties.{sc-ext}[HateoasProperties]) - spring.hateoas.use-hal-as-default-json-media-type=true # if application/hal+json responses should be sent in response to requests for application/json + spring.hateoas.use-hal-as-default-json-media-type=true # Specify if application/hal+json responses should be sent to requests that accept application/json. # HTTP encoding ({sc-spring-boot-autoconfigure}/web/HttpEncodingProperties.{sc-ext}[HttpEncodingProperties]) - spring.http.encoding.charset=UTF-8 # the encoding of HTTP requests/responses - spring.http.encoding.enabled=true # enable http encoding support - spring.http.encoding.force=true # force the configured encoding + spring.http.encoding.charset=UTF-8 # Charset of HTTP requests and responses. Added to the "Content-Type" header if not set explicitly. + spring.http.encoding.enabled=true # Enable http encoding support. + spring.http.encoding.force=true # Force the encoding to the configured charset on HTTP requests and responses. # HTTP message conversion - spring.http.converters.preferred-json-mapper= # the preferred JSON mapper to use for HTTP message conversion. Set to "gson" to force the use of Gson when both it and Jackson are on the classpath. + spring.http.converters.preferred-json-mapper=jackson # Preferred JSON mapper to use for HTTP message conversion. Set to "gson" to force the use of Gson when both it and Jackson are on the classpath. # JACKSON ({sc-spring-boot-autoconfigure}/jackson/JacksonProperties.{sc-ext}[JacksonProperties]) - spring.jackson.date-format= # Date format string (e.g. yyyy-MM-dd HH:mm:ss), or a fully-qualified date format class name (e.g. com.fasterxml.jackson.databind.util.ISO8601DateFormat) - spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy (e.g. CAMEL_CASE_TO_LOWER_CASE_WITH_UNDERSCORES) or the fully-qualified class name of a PropertyNamingStrategy subclass - spring.jackson.deserialization.*= # see Jackson's DeserializationFeature - spring.jackson.generator.*= # see Jackson's JsonGenerator.Feature - spring.jackson.joda-date-time-format= # Joda date time format string - spring.jackson.locale= # locale used for formatting - spring.jackson.mapper.*= # see Jackson's MapperFeature - spring.jackson.parser.*= # see Jackson's JsonParser.Feature - spring.jackson.serialization.*= # see Jackson's SerializationFeature - spring.jackson.serialization-inclusion= # Controls the inclusion of properties during serialization (see Jackson's JsonInclude.Include) - spring.jackson.time-zone= # Time zone used when formatting dates. Configured using any recognized time zone identifier, for example "America/Los_Angeles" or "GMT+10" + spring.jackson.date-format= # Date format string or a fully-qualified date format class name. For instance `yyyy-MM-dd HH:mm:ss`. + spring.jackson.deserialization.*= # Jackson on/off features that affect the way Java objects are deserialized. + spring.jackson.generator.*= # Jackson on/off features for generators. + spring.jackson.joda-date-time-format= # Joda date time format string. If not configured, "date-format" will be used as a fallback if it is configured with a format string. + spring.jackson.locale= # Locale used for formatting. + spring.jackson.mapper.*= # Jackson general purpose on/off features. + spring.jackson.parser.*= # Jackson on/off features for parsers. + spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy. Can also be a fully-qualified class name of a PropertyNamingStrategy subclass. + spring.jackson.serialization.*= # Jackson on/off features that affect the way Java objects are serialized. + spring.jackson.serialization-inclusion= # Controls the inclusion of properties during serialization. Configured with one of the values in Jackson's JsonInclude.Include enumeration. + spring.jackson.time-zone= # Time zone used when formatting dates. For instance `America/Los_Angeles` # THYMELEAF ({sc-spring-boot-autoconfigure}/thymeleaf/ThymeleafAutoConfiguration.{sc-ext}[ThymeleafAutoConfiguration]) - spring.thymeleaf.check-template-location=true - spring.thymeleaf.prefix=classpath:/templates/ - spring.thymeleaf.excluded-view-names= # comma-separated list of view names that should be excluded from resolution - spring.thymeleaf.view-names= # comma-separated list of view names that can be resolved - spring.thymeleaf.suffix=.html - spring.thymeleaf.mode=HTML5 - spring.thymeleaf.enabled=true # enable MVC view resolution - spring.thymeleaf.encoding=UTF-8 - spring.thymeleaf.content-type=text/html # ;charset= is added - spring.thymeleaf.cache=true # set to false for hot refresh - spring.thymeleaf.template-resolver-order= # order of the template resolver in the chain + spring.thymeleaf.cache=true # Enable template caching. + spring.thymeleaf.check-template-location=true # Check that the templates location exists. + spring.thymeleaf.content-type=text/html # Content-Type value. + spring.thymeleaf.enabled=true # Enable MVC Thymeleaf view resolution. + spring.thymeleaf.encoding=UTF-8 # Template encoding. + spring.thymeleaf.excluded-view-names= # Comma-separated list of view names that should be excluded from resolution. + spring.thymeleaf.mode=HTML5 # Template mode to be applied to templates. See also StandardTemplateModeHandlers. + spring.thymeleaf.prefix=classpath:/templates/ # Prefix that gets prepended to view names when building a URL. + spring.thymeleaf.suffix=.html # Suffix that gets appended to view names when building a URL. + spring.thymeleaf.template-resolver-order= # Order of the template resolver in the chain. + spring.thymeleaf.view-names= # Comma-separated list of view names that can be resolved. # FREEMARKER ({sc-spring-boot-autoconfigure}/freemarker/FreeMarkerAutoConfiguration.{sc-ext}[FreeMarkerAutoConfiguration]) - spring.freemarker.allow-request-override=false - spring.freemarker.allow-session-override=false - spring.freemarker.cache=true - spring.freemarker.check-template-location=true - spring.freemarker.charset=UTF-8 - spring.freemarker.content-type=text/html - spring.freemarker.enabled=true # enable MVC view resolution - spring.freemarker.expose-request-attributes=false - spring.freemarker.expose-session-attributes=false - spring.freemarker.expose-spring-macro-helpers=false - spring.freemarker.prefix= - spring.freemarker.prefer-file-system-access=true # prefer file system access for template loading - spring.freemarker.request-context-attribute= - spring.freemarker.settings.*= - spring.freemarker.suffix=.ftl - spring.freemarker.template-loader-path=classpath:/templates/ # comma-separated list - spring.freemarker.view-names= # whitelist of view names that can be resolved + spring.freemarker.allow-request-override=false # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name. + spring.freemarker.allow-session-override=false # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name. + spring.freemarker.cache=false # Enable template caching. + spring.freemarker.charset=UTF-8 # Template encoding. + spring.freemarker.check-template-location=true # Check that the templates location exists. + spring.freemarker.content-type=text/html # Content-Type value. + spring.freemarker.enabled=true # Enable MVC view resolution for this technology. + spring.freemarker.expose-request-attributes=false # Set whether all request attributes should be added to the model prior to merging with the template. + spring.freemarker.expose-session-attributes=false # Set whether all HttpSession attributes should be added to the model prior to merging with the template. + spring.freemarker.expose-spring-macro-helpers=true # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext". + spring.freemarker.prefer-file-system-access=true # Prefer file system access for template loading. File system access enables hot detection of template changes. + spring.freemarker.prefix= # Prefix that gets prepended to view names when building a URL. + spring.freemarker.request-context-attribute= # Name of the RequestContext attribute for all views. + spring.freemarker.settings.*= # Well-known FreeMarker keys which will be passed to FreeMarker's Configuration. + spring.freemarker.suffix= # Suffix that gets appended to view names when building a URL. + spring.freemarker.template-loader-path=classpath:/templates/ # Comma-separated list of template paths. + spring.freemarker.view-names= # White list of view names that can be resolved. # GROOVY TEMPLATES ({sc-spring-boot-autoconfigure}/groovy/template/GroovyTemplateAutoConfiguration.{sc-ext}[GroovyTemplateAutoConfiguration]) - spring.groovy.template.allow-request-override=false - spring.groovy.template.allow-session-override=false - spring.groovy.template.cache=true - spring.groovy.template.charset=UTF-8 - spring.groovy.template.check-template-location=true # check that the templates location exists + spring.groovy.template.allow-request-override=false # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name. + spring.groovy.template.allow-session-override=false # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name. + spring.groovy.template.cache= # Enable template caching. + spring.groovy.template.charset=UTF-8 # Template encoding. + spring.groovy.template.check-template-location=true # Check that the templates location exists. spring.groovy.template.configuration.*= # See GroovyMarkupConfigurer - spring.groovy.template.content-type=text/html - spring.groovy.template.enabled=true # enable MVC view resolution - spring.groovy.template.expose-request-attributes=false - spring.groovy.template.expose-session-attributes=false - spring.groovy.template.expose-spring-macro-helpers=false - spring.groovy.template.prefix= - spring.groovy.template.request-context-attribute= - spring.groovy.template.resource-loader-path=classpath:/templates/ - spring.groovy.template.suffix=.tpl - spring.groovy.template.view-names= # whitelist of view names that can be resolved + spring.groovy.template.content-type=test/html # Content-Type value. + spring.groovy.template.enabled=true # Enable MVC view resolution for this technology. + spring.groovy.template.expose-request-attributes=false # Set whether all request attributes should be added to the model prior to merging with the template. + spring.groovy.template.expose-session-attributes=false # Set whether all HttpSession attributes should be added to the model prior to merging with the template. + spring.groovy.template.expose-spring-macro-helpers=true # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext". + spring.groovy.template.prefix= # Prefix that gets prepended to view names when building a URL. + spring.groovy.template.request-context-attribute= # Name of the RequestContext attribute for all views. + spring.groovy.template.resource-loader-path=classpath:/templates/ # Template path. + spring.groovy.template.suffix=.tpl # Suffix that gets appended to view names when building a URL. + spring.groovy.template.view-names= # White list of view names that can be resolved. # VELOCITY TEMPLATES ({sc-spring-boot-autoconfigure}/velocity/VelocityAutoConfiguration.{sc-ext}[VelocityAutoConfiguration]) - spring.velocity.allow-request-override=false - spring.velocity.allow-session-override=false - spring.velocity.cache=true - spring.velocity.check-template-location=true - spring.velocity.charset=UTF-8 # charset for input and output encoding - spring.velocity.content-type=text/html - spring.velocity.date-tool-attribute= - spring.velocity.enabled=true # enable MVC view resolution - spring.velocity.expose-request-attributes=false - spring.velocity.expose-session-attributes=false - spring.velocity.expose-spring-macro-helpers=false - spring.velocity.number-tool-attribute= - spring.velocity.prefer-file-system-access=true # prefer file system access for template loading - spring.velocity.prefix= - spring.velocity.properties.*= - spring.velocity.request-context-attribute= - spring.velocity.resource-loader-path=classpath:/templates/ - spring.velocity.suffix=.vm - spring.velocity.toolbox-config-location= # velocity Toolbox config location, for example "/WEB-INF/toolbox.xml" - spring.velocity.view-names= # whitelist of view names that can be resolved + spring.velocity.allow-request-override=false # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name. + spring.velocity.allow-session-override=false # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name. + spring.velocity.cache= # Enable template caching. + spring.velocity.charset=UTF-8 # Template encoding. + spring.velocity.check-template-location=true # Check that the templates location exists. + spring.velocity.content-type=text/html # Content-Type value. + spring.velocity.date-tool-attribute= # Name of the DateTool helper object to expose in the Velocity context of the view. + spring.velocity.enabled=true # Enable MVC view resolution for this technology. + spring.velocity.expose-request-attributes=false # Set whether all request attributes should be added to the model prior to merging with the template. + spring.velocity.expose-session-attributes=false # Set whether all HttpSession attributes should be added to the model prior to merging with the template. + spring.velocity.expose-spring-macro-helpers=true # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext". + spring.velocity.number-tool-attribute= # Name of the NumberTool helper object to expose in the Velocity context of the view. + spring.velocity.prefer-file-system-access=true # Prefer file system access for template loading. File system access enables hot detection of template changes. + spring.velocity.prefix= # Prefix that gets prepended to view names when building a URL. + spring.velocity.properties.*= # Additional velocity properties. + spring.velocity.request-context-attribute= # Name of the RequestContext attribute for all views. + spring.velocity.resource-loader-path=classpath:/templates/ # Template path. + spring.velocity.suffix=.vm # Suffix that gets appended to view names when building a URL. + spring.velocity.toolbox-config-location= # Velocity Toolbox config location. For instance `/WEB-INF/toolbox.xml` + spring.velocity.view-names= # White list of view names that can be resolved. # MUSTACHE TEMPLATES ({sc-spring-boot-autoconfigure}/mustache/MustacheAutoConfiguration.{sc-ext}[MustacheAutoConfiguration]) - spring.mustache.cache=true - spring.mustache.charset=UTF-8 - spring.mustache.check-template-location=true - spring.mustache.content-type=UTF-8 - spring.mustache.enabled=true # enable MVC view resolution - spring.mustache.prefix= - spring.mustache.suffix=.html - spring.mustache.view-names= # whitelist of view names that can be resolved + spring.mustache.cache=false # Enable template caching. + spring.mustache.charset=UTF-8 # Template encoding. + spring.mustache.check-template-location=true # Check that the templates location exists. + spring.mustache.content-type=text/html # Content-Type value. + spring.mustache.enabled=true # Enable MVC view resolution for this technology. + spring.mustache.prefix=classpath:/templates/ # Prefix to apply to template names. + spring.mustache.suffix=.html # Suffix to apply to template names. + spring.mustache.view-names= # White list of view names that can be resolved. # JERSEY ({sc-spring-boot-autoconfigure}/jersey/JerseyProperties.{sc-ext}[JerseyProperties]) - spring.jersey.application-path # path that serves as the base URI for the application - spring.jersey.type=servlet # servlet or filter - spring.jersey.init= # init params - spring.jersey.filter.order= + spring.jersey.application-path= # Path that serves as the base URI for the application. Overrides the value of "@ApplicationPath" if specified. + spring.jersey.filter.order=0 # Jersey filter chain order. + spring.jersey.init.*= # Init parameters to pass to Jersey via the servlet or filter. + spring.jersey.type=servlet # Jersey integration type. Can be either "servlet" or "filter". # INTERNATIONALIZATION ({sc-spring-boot-autoconfigure}/MessageSourceAutoConfiguration.{sc-ext}[MessageSourceAutoConfiguration]) - spring.messages.basename=messages - spring.messages.cache-seconds=-1 - spring.messages.encoding=UTF-8 - spring.messages.fallback-to-system-locale=true # set whether to fall back to the system Locale + spring.messages.basename=messages # Comma-separated list of basenames, each following the ResourceBundle convention. + spring.messages.cache-seconds=-1 # Loaded resource bundle files cache expiration, in seconds. When set to -1, bundles are cached forever. + spring.messages.encoding=UTF-8 # Message bundles encoding. + spring.messages.fallback-to-system-locale=true # Set whether to fall back to the system Locale if no files for a specific Locale have been found. [[common-application-properties-security]] # SECURITY ({sc-spring-boot-autoconfigure}/security/SecurityProperties.{sc-ext}[SecurityProperties]) - security.user.name=user # login username - security.user.password= # login password - security.user.role=USER # role assigned to the user - security.require-ssl=false # advanced settings ... - security.enable-csrf=false - security.basic.enabled=true - security.basic.realm=Spring - security.basic.path= # /** - security.basic.authorize-mode= # ROLE, AUTHENTICATED, NONE - security.filter-order=0 - security.headers.xss=true - security.headers.cache=true - security.headers.frame=true - security.headers.content-type=true - security.headers.hsts=all # none / domain / all - security.sessions=stateless # always / never / if_required / stateless - security.ignored= # Comma-separated list of paths to exclude from the default secured paths + security.basic.authorize-mode=role # Security authorize mode to apply. + security.basic.enabled=true # Enable basic authentication. + security.basic.path=/** # Comma-separated list of paths to secure. + security.basic.realm=Spring # HTTP basic realm name. + security.enable-csrf=false # Enable Cross Site Request Forgery support. + security.filter-order=0 # Security filter chain order. + security.headers.cache=true # Enable cache control HTTP headers. + security.headers.content-type=true # Enable "X-Content-Type-Options" header. + security.headers.frame=true # Enable "X-Frame-Options" header. + security.headers.hsts= # HTTP Strict Transport Security (HSTS) mode (none, domain, all). + security.headers.xss=true # Enable cross site scripting (XSS) protection. + security.ignored= # Comma-separated list of paths to exclude from the default secured paths. + security.require-ssl=false # Enable secure channel for all requests. + security.sessions=stateless # Session creation policy (always, never, if_required, stateless). + security.user.name=user # Default user name. + security.user.password= # Password for the default user name. A random password is logged on startup by default. + security.user.role=USER # Granted roles for the default user name. # SECURITY OAUTH2 CLIENT ({sc-spring-boot-autoconfigure}/security/oauth2/OAuth2ClientProperties.{sc-ext}[OAuth2ClientProperties] - security.oauth2.client.client-id= # OAuth2 client id - security.oauth2.client.client-secret= # OAuth2 client secret. A random secret is generated by default + security.oauth2.client.client-id= # OAuth2 client id. + security.oauth2.client.client-secret= # OAuth2 client secret. A random secret is generated by default - # SECURITY OAUTH2 SSO ({sc-spring-boot-autoconfigure}/security/oauth2/client/OAuth2SsoProperties.{sc-ext}[OAuth2SsoProperties] - security.oauth2.sso.filter-order= # Filter order to apply if not providing an explicit WebSecurityConfigurerAdapter - security.oauth2.sso.login-path= # Path to the login page, i.e. the one that triggers the redirect to the OAuth2 Authorization Server + # SECURITY OAUTH2 RESOURCES ({sc-spring-boot-autoconfigure}/security/oauth2/resource/ResourceServerProperties.{sc-ext}[ResourceServerProperties] + security.oauth2.resource.id= # Identifier of the resource. + security.oauth2.resource.jwt.key-uri= # The URI of the JWT token. Can be set if the value is not available and the key is public. + security.oauth2.resource.jwt.key-value= # The verification key of the JWT token. Can either be a symmetric secret or PEM-encoded RSA public key. + security.oauth2.resource.prefer-token-info=true # Use the token info, can be set to false to use the user info. + security.oauth2.resource.service-id=resource # + security.oauth2.resource.token-info-uri= # URI of the token decoding endpoint. + security.oauth2.resource.token-type= # The token type to send when using the userInfoUri. + security.oauth2.resource.user-info-uri= # URI of the user endpoint. + + # SECURITY OAUTH2 SSO ({sc-spring-boot-autoconfigure}/security/oauth2/client/OAuth2SsoProperties.{sc-ext}[OAuth2SsoProperties] + security.oauth2.sso.filter-order= # Filter order to apply if not providing an explicit WebSecurityConfigurerAdapter + security.oauth2.sso.login-path=/login # Path to the login page, i.e. the one that triggers the redirect to the OAuth2 Authorization Server # DATASOURCE ({sc-spring-boot-autoconfigure}/jdbc/DataSourceAutoConfiguration.{sc-ext}[DataSourceAutoConfiguration] & {sc-spring-boot-autoconfigure}/jdbc/DataSourceProperties.{sc-ext}[DataSourceProperties]) - spring.datasource.name=testdb # name of the data source - spring.datasource.initialize=true # populate using data.sql - spring.datasource.schema= # a schema (DDL) script resource reference - spring.datasource.data= # a data (DML) script resource reference - spring.datasource.sql-script-encoding= # a charset for reading SQL scripts - spring.datasource.platform= # the platform to use in the schema resource (schema-${platform}.sql) - spring.datasource.continue-on-error=false # continue even if can't be initialized - spring.datasource.separator=; # statement separator in SQL initialization scripts - spring.datasource.type= # fully qualified name of the connection pool implementation to use - spring.datasource.driver-class-name= # JDBC Settings... - spring.datasource.url= - spring.datasource.username= - spring.datasource.password= - spring.datasource.jndi-name= # For JNDI lookup (class, url, username & password are ignored when set) - spring.datasource.max-active=100 # Advanced configuration... - spring.datasource.max-idle=8 - spring.datasource.min-idle=8 - spring.datasource.initial-size=10 - spring.datasource.validation-query= - spring.datasource.test-on-borrow=false - spring.datasource.test-on-return=false - spring.datasource.test-while-idle= - spring.datasource.time-between-eviction-runs-millis= - spring.datasource.min-evictable-idle-time-millis= + spring.datasource.continue-on-error=false # Do not stop if an error occurs while initializing the database. + spring.datasource.data= # Data (DML) script resource reference. + spring.datasource.driver-class-name= # Fully qualified name of the JDBC driver. Auto-detected based on the URL by default. + spring.datasource.initialize=true # Populate the database using 'data.sql'. + spring.datasource.jmx-enabled=false # Enable JMX support (if provided by the underlying pool). + spring.datasource.jndi-name= # JNDI location of the datasource. Class, url, username & password are ignored when set. + spring.datasource.max-active= # For instance 100 + spring.datasource.max-idle= # For instance 8 spring.datasource.max-wait= - spring.datasource.jmx-enabled=false # Export JMX MBeans (if supported) + spring.datasource.min-evictable-idle-time-millis= + spring.datasource.min-idle=8 + spring.datasource.name=testdb # Name of the datasource. + spring.datasource.password= # Login password of the database. + spring.datasource.platform=all # Platform to use in the schema resource (schema-${platform}.sql). + spring.datasource.schema= # Schema (DDL) script resource reference. + spring.datasource.separator=; # Statement separator in SQL initialization scripts. + spring.datasource.sql-script-encoding= # SQL scripts encoding. + spring.datasource.test-on-borrow= # For instance `false` + spring.datasource.test-on-return= # For instance `false` + spring.datasource.test-while-idle= # + spring.datasource.time-between-eviction-runs-millis= 1 + spring.datasource.type= # Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath. + spring.datasource.url= # JDBC url of the database. + spring.datasource.username= + spring.datasource.validation-query= # DAO ({sc-spring-boot-autoconfigure}/dao/PersistenceExceptionTranslationAutoConfiguration.{sc-ext}[PersistenceExceptionTranslationAutoConfiguration]) - spring.dao.exceptiontranslation.enabled=true + spring.dao.exceptiontranslation.enabled=true # Enable the PersistenceExceptionTranslationPostProcessor. # CASSANDRA ({sc-spring-boot-autoconfigure}/cassandra/CassandraProperties.{sc-ext}[CassandraProperties]) - spring.data.cassandra.cluster-name= # the cluster name - spring.data.cassandra.contact-points=localhost # comma-list of cluster node addresses - spring.data.cassandra.keyspace-name= # the keyspace name - spring.data.cassandra.port= # the connection port - spring.data.cassandra.compression= # compression method (none/snappy/lz4) - spring.data.cassandra.load-balancing-policy= # class name for a LoadBalancingPolicy - spring.data.cassandra.consistency-level= # consistency level (any/one/two/three/quorum/all...) - spring.data.cassandra.serial-consistency-level= # serial consistency level (any/one/two/three/quorum/all...) - spring.data.cassandra.fetch-size= - spring.data.cassandra.reconnection-policy= # class name for a ReconnectionPolicy - spring.data.cassandra.retry-policy= # class name for a RetryPolicy - spring.data.cassandra.connect-timeout-millis= # connect timeout (ms) - spring.data.cassandra.read-timeout-millis= # read timeout (ms) - spring.data.cassandra.ssl=false + spring.data.cassandra.cluster-name= # Name of the Cassandra cluster. + spring.data.cassandra.compression= # Compression supported by the Cassandra binary protocol. + spring.data.cassandra.connect-timeout-millis= # Socket option: connection time out. + spring.data.cassandra.consistency-level= # Queries consistency level. + spring.data.cassandra.contact-points=localhost # Comma-separated list of cluster node addresses. + spring.data.cassandra.fetch-size= # Queries default fetch size. + spring.data.cassandra.keyspace-name= # Keyspace name to use. + spring.data.cassandra.load-balancing-policy= # Class name of the load balancing policy. + spring.data.cassandra.port= # Port of the Cassandra server. + spring.data.cassandra.read-timeout-millis= # Socket option: read time out. + spring.data.cassandra.reconnection-policy= # Reconnection policy class. + spring.data.cassandra.retry-policy= # Class name of the retry policy. + spring.data.cassandra.serial-consistency-level= # Queries serial consistency level. + spring.data.cassandra.ssl=false # Enable SSL support. # MONGODB ({sc-spring-boot-autoconfigure}/mongo/MongoProperties.{sc-ext}[MongoProperties]) - spring.data.mongodb.host= # the db host - spring.data.mongodb.port=27017 # the connection port (defaults to 27017) - spring.data.mongodb.uri=mongodb://localhost/test # connection URL - spring.data.mongodb.database= - spring.data.mongodb.authentication-database= - spring.data.mongodb.grid-fs-database= - spring.data.mongodb.username= - spring.data.mongodb.password= - spring.data.mongodb.repositories.enabled=true # if spring data repository support is enabled - spring.data.mongodb.field-naming-strategy= # fully qualified name of the FieldNamingStrategy to use + spring.data.mongodb.authentication-database= # Authentication database name. + spring.data.mongodb.database=test # Database name. + spring.data.mongodb.field-naming-strategy= # Fully qualified name of the FieldNamingStrategy to use. + spring.data.mongodb.grid-fs-database= # GridFS database name. + spring.data.mongodb.host=localhost # Mongo server host. + spring.data.mongodb.password= # Login password of the mongo server. + spring.data.mongodb.port=27017 # Mongo server port. + spring.data.mongodb.repositories.enabled=true # Enable Mongo repositories. + spring.data.mongodb.uri=mongodb://localhost/test # Mongo database URI. When set, host and port are ignored. + spring.data.mongodb.username= # Login user of the mongo server. # EMBEDDED MONGODB ({sc-spring-boot-autoconfigure}/mongo/embedded/EmbeddedMongoProperties.{sc-ext}[EmbeddedMongoProperties]) - spring.mongodb.embedded.version=2.6.10 # version of Mongo to use - spring.mongodb.embedded.features=SYNC_DELAY # comma-separated list of features to enable + spring.mongodb.embedded.features=SYNC_DELAY # Comma-separated list of features to enable. + spring.mongodb.embedded.version=2.6.10 # Version of Mongo to use. # JPA ({sc-spring-boot-autoconfigure}/orm/jpa/JpaBaseConfiguration.{sc-ext}[JpaBaseConfiguration], {sc-spring-boot-autoconfigure}/orm/jpa/HibernateJpaAutoConfiguration.{sc-ext}[HibernateJpaAutoConfiguration]) - spring.jpa.properties.*= # properties to set on the JPA connection - spring.jpa.open-in-view=true - spring.jpa.show-sql=true - spring.jpa.database-platform= - spring.jpa.database= - spring.jpa.generate-ddl=false # ignored by Hibernate, might be useful for other vendors - spring.jpa.hibernate.naming-strategy= # naming classname - spring.jpa.hibernate.ddl-auto= # defaults to create-drop for embedded dbs - spring.data.jpa.repositories.enabled=true # if spring data repository support is enabled + spring.data.jpa.repositories.enabled=true # Enable JPA repositories. + spring.jpa.database= # Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property. + spring.jpa.database-platform= # Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum. + spring.jpa.generate-ddl=false # Initialize the schema on startup. + spring.jpa.hibernate.ddl-auto= # DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Default to "create-drop" when using an embedded database, "none" otherwise. + spring.jpa.hibernate.naming-strategy= # Naming strategy fully qualified name. + spring.jpa.open-in-view=true # Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request. + spring.jpa.properties.*= # Additional native properties to set on the JPA provider. + spring.jpa.show-sql=false # Enable logging of SQL statements. # JTA ({sc-spring-boot-autoconfigure}/transaction/jta/JtaAutoConfiguration.{sc-ext}[JtaAutoConfiguration]) - spring.jta.log-dir= # transaction log dir spring.jta.*= # technology specific configuration + spring.jta.log-dir= # Transaction logs directory. # JOOQ ({sc-spring-boot-autoconfigure}/jooq/JooqAutoConfiguration.{sc-ext}[JooqAutoConfiguration]) - spring.jooq.sql-dialect= + spring.jooq.sql-dialect= # SQLDialect JOOQ used when communicating with the configured datasource. For instance `POSTGRES` # ATOMIKOS - spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool - spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether or not to ignore the transacted flag when creating session - spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether or not local transactions are desired - spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread - spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool + spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool. + spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether or not to ignore the transacted flag when creating session. + spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether or not local transactions are desired. + spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread. + spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit. - spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool - spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool + spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool. + spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool. spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit. - spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery - spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool - spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool - spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection - spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread - spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool + spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery. + spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool. + spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool. + spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection. + spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread. + spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit. - spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool - spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool + spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool. + spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool. spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit. - spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it - spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery + spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it. + spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery. # BITRONIX - spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool - spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired - spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool - spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions - spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted - spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically - spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether or not produces and consumers should be cached - spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether or not the provider can run many transactions on the same connection and supports transaction interleaving - spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether or not recovery failures should be ignored - spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool - spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit - spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool - spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider - spring.jta.bitronix.connectionfactory.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction - spring.jta.bitronix.connectionfactory.test-connections=true # Whether or not connections should be tested when acquired from the pool - spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The postion that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE) - spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery - spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources - spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider - spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool - spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired - spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool - spring.jta.bitronix.datasource.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions - spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted - spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically - spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections - spring.jta.bitronix.datasource.defer-connection-release=true # Whether or not the database can run many transactions on the same connection and supports transaction interleaving - spring.jta.bitronix.datasource.enable-jdbc4-connection-test= # Whether or not Connection.isValid() is called when acquiring a connection from the pool - spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether or not recovery failures should be ignored - spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections - spring.jta.bitronix.datasource.local-auto-commit= # The default auto-commit mode for local transactions - spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection - spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool - spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit - spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool - spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache - spring.jta.bitronix.datasource.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction - spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it - spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE) - spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery - spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources + spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool. + spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired. + spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool. + spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions. + spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted. + spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically. + spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether or not produces and consumers should be cached. + spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether or not the provider can run many transactions on the same connection and supports transaction interleaving. + spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether or not recovery failures should be ignored. + spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. + spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit. + spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool. + spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider. + spring.jta.bitronix.connectionfactory.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction. + spring.jta.bitronix.connectionfactory.test-connections=true # Whether or not connections should be tested when acquired from the pool. + spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The postion that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE). + spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery. + spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources. + spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider. + spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool. + spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired. + spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool. + spring.jta.bitronix.datasource.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions. + spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted. + spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically. + spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections. + spring.jta.bitronix.datasource.defer-connection-release=true # Whether or not the database can run many transactions on the same connection and supports transaction interleaving. + spring.jta.bitronix.datasource.enable-jdbc4-connection-test= # Whether or not Connection.isValid() is called when acquiring a connection from the pool. + spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether or not recovery failures should be ignored. + spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections. + spring.jta.bitronix.datasource.local-auto-commit= # The default auto-commit mode for local transactions. + spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection. + spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool. + spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit. + spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool. + spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache. + spring.jta.bitronix.datasource.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction. + spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it. + spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE). + spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery. + spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources. # SOLR ({sc-spring-boot-autoconfigure}/solr/SolrProperties.{sc-ext}[SolrProperties]) - spring.data.solr.host=http://127.0.0.1:8983/solr - spring.data.solr.zk-host= - spring.data.solr.repositories.enabled=true # if spring data repository support is enabled + spring.data.solr.host=http://127.0.0.1:8983/solr # Solr host. Ignored if "zk-host" is set. + spring.data.solr.repositories.enabled=true # Enable Solr repositories. + spring.data.solr.zk-host= # ZooKeeper host address in the form HOST:PORT. # ELASTICSEARCH ({sc-spring-boot-autoconfigure}/elasticsearch/ElasticsearchProperties.{sc-ext}[ElasticsearchProperties]) - spring.data.elasticsearch.cluster-name= # The cluster name (defaults to elasticsearch) - spring.data.elasticsearch.cluster-nodes= # The address(es) of the server node (comma-separated; if not specified starts a client node) - spring.data.elasticsearch.properties.*= # Additional properties used to configure the client - spring.data.elasticsearch.repositories.enabled=true # if spring data repository support is enabled + spring.data.elasticsearch.cluster-name=elasticsearch # Elasticsearch cluster name. + spring.data.elasticsearch.cluster-nodes= # Comma-separated list of cluster node addresses. If not specified, starts a client node. + spring.data.elasticsearch.properties.*= # Additional properties used to configure the client. + spring.data.elasticsearch.repositories.enabled=true # Enable Elasticsearch repositories. # DATA REST ({sc-spring-boot-autoconfigure}/data/rest/RepositoryRestProperties.{sc-ext}[RepositoryRestProperties]) - spring.data.rest.base-path= # base path to be used by Spring Data REST to expose repository resources - spring.data.rest.default-page-size= # default size of pages - spring.data.rest.enable-enum-translation= # enable enum value translation via the Spring Data REST default resource bundle - spring.data.rest.limit-param-name= # name of the URL query string parameter that indicates how many results to return at once - spring.data.rest.max-page-size= # maximum size of pages - spring.data.rest.page-param-name= # name of the URL query string parameter that indicates what page to return - spring.data.rest.return-body-on-create= # return a response body after creating an entity - spring.data.rest.return-body-on-update= # return a response body after updating an entity - spring.data.rest.sort-param-name= # name of the URL query string parameter that indicates what direction to sort results + spring.data.rest.base-path= # Base path to be used by Spring Data REST to expose repository resources. + spring.data.rest.default-page-size= # Default size of pages. + spring.data.rest.enable-enum-translation= # Enable enum value translation via the Spring Data REST default resource bundle. + spring.data.rest.limit-param-name= # Name of the URL query string parameter that indicates how many results to return at once. + spring.data.rest.max-page-size= # Maximum size of pages. + spring.data.rest.page-param-name= # Name of the URL query string parameter that indicates what page to return. + spring.data.rest.return-body-on-create= # Return a response body after creating an entity. + spring.data.rest.return-body-on-update= # Return a response body after updating an entity. + spring.data.rest.sort-param-name= # Name of the URL query string parameter that indicates what direction to sort results. # FLYWAY ({sc-spring-boot-autoconfigure}/flyway/FlywayProperties.{sc-ext}[FlywayProperties]) - flyway.*= # Any public property available on the auto-configured `Flyway` object - flyway.check-location=false # check that migration scripts location exists + flyway.baseline-description= # + flyway.baseline-version=1 # version to start migration + flyway.baseline-on-migrate= # + flyway.check-location=false # Check that migration scripts location exists. + flyway.clean-on-validation-error= # + flyway.enabled=true # Enable flyway. + flyway.encoding= # + flyway.ignore-failed-future-migration= # + flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it. flyway.locations=classpath:db/migration # locations of migrations scripts - flyway.schemas= # schemas to update - flyway.init-version= 1 # version to start migration - flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it - flyway.sql-migration-prefix=V - flyway.sql-migration-suffix=.sql - flyway.enabled=true - flyway.url= # JDBC url if you want Flyway to create its own DataSource - flyway.user= # JDBC username if you want Flyway to create its own DataSource + flyway.out-of-order= # flyway.password= # JDBC password if you want Flyway to create its own DataSource + flyway.placeholder-prefix= # + flyway.placeholder-replacement= # + flyway.placeholder-suffix= # + flyway.placeholders.*= # + flyway.schemas= # schemas to update + flyway.sql-migration-prefix=V # + flyway.sql-migration-separator= # + flyway.sql-migration-suffix=.sql # + flyway.table= # + flyway.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used. + flyway.user= # Login user of the database to migrate. + flyway.validate-on-migrate= # # LIQUIBASE ({sc-spring-boot-autoconfigure}/liquibase/LiquibaseProperties.{sc-ext}[LiquibaseProperties]) - liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml - liquibase.check-change-log-location=true # check the change log location exists - liquibase.contexts= # runtime contexts to use - liquibase.labels= # runtime labels to use - liquibase.default-schema= # default database schema to use - liquibase.drop-first=false - liquibase.enabled=true - liquibase.url= # specific JDBC url (if not set the default datasource is used) - liquibase.user= # user name for liquibase.url - liquibase.password= # password for liquibase.url - liquibase.parameters= # change log parameters + liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml # Change log configuration path. + liquibase.check-change-log-location=true # Check the change log location exists. + liquibase.contexts= # Comma-separated list of runtime contexts to use. + liquibase.default-schema= # Default database schema. + liquibase.drop-first=false # Drop the database schema first. + liquibase.enabled=true # Enable liquibase support. + liquibase.labels= # Comma-separated list of runtime labels to use. + liquibase.parameters.*= # Change log parameters. + liquibase.password= # Login password of the database to migrate. + liquibase.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used. + liquibase.user= # Login user of the database to migrate. # JMX - spring.jmx.default-domain= # JMX domain name - spring.jmx.enabled=true # Expose MBeans from Spring - spring.jmx.server=mbeanServer # MBeanServer bean name + spring.jmx.default-domain= # JMX domain name. + spring.jmx.enabled=true # Expose management beans to the JMX domain. + spring.jmx.server=mbeanServer # MBeanServer bean name. # RABBIT ({sc-spring-boot-autoconfigure}/amqp/RabbitProperties.{sc-ext}[RabbitProperties]) - spring.rabbitmq.addresses= # connection addresses (e.g. myhost:9999,otherhost:1111) - spring.rabbitmq.dynamic=true # create an AmqpAdmin bean - spring.rabbitmq.host= # connection host - spring.rabbitmq.port= # connection port - spring.rabbitmq.password= # login password - spring.rabbitmq.requested-heartbeat= # requested heartbeat timeout, in seconds; zero for none - spring.rabbitmq.listener.acknowledge-mode= # acknowledge mode of container - spring.rabbitmq.listener.auto-startup=true # start the container automatically on startup - spring.rabbitmq.listener.concurrency= # minimum number of consumers - spring.rabbitmq.listener.max-concurrency= # maximum number of consumers - spring.rabbitmq.listener.prefetch= # number of messages to be handled in a single request - spring.rabbitmq.listener.transaction-size= # number of messages to be processed in a transaction - spring.rabbitmq.ssl.enabled=false # enable SSL support - spring.rabbitmq.ssl.key-store= # path to the key store that holds the SSL certificate - spring.rabbitmq.ssl.key-store-password= # password used to access the key store - spring.rabbitmq.ssl.trust-store= # trust store that holds SSL certificates - spring.rabbitmq.ssl.trust-store-password= # password used to access the trust store - spring.rabbitmq.username= # login user - spring.rabbitmq.virtual-host= # virtual host to use when connecting to the broker + spring.rabbitmq.addresses= # Comma-separated list of addresses to which the client should connect to. + spring.rabbitmq.dynamic=true # Create an AmqpAdmin bean. + spring.rabbitmq.host=localhost # RabbitMQ host. + spring.rabbitmq.listener.acknowledge-mode= # Acknowledge mode of container. + spring.rabbitmq.listener.auto-startup=true # Start the container automatically on startup. + spring.rabbitmq.listener.concurrency= # Minimum number of consumers. + spring.rabbitmq.listener.max-concurrency= # Maximum number of consumers. + spring.rabbitmq.listener.prefetch= # Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used). + spring.rabbitmq.listener.transaction-size= # Number of messages to be processed in a transaction. For best results it should be less than or equal to the prefetch count. + spring.rabbitmq.password= # Login to authenticate against the broker. + spring.rabbitmq.port=5672 # RabbitMQ port. + spring.rabbitmq.requested-heartbeat= # Requested heartbeat timeout, in seconds; zero for none. + spring.rabbitmq.ssl.enabled=false # Enable SSL support. + spring.rabbitmq.ssl.key-store= # Path to the key store that holds the SSL certificate. + spring.rabbitmq.ssl.key-store-password= # Password used to access the key store. + spring.rabbitmq.ssl.trust-store= # Trust store that holds SSL certificates. + spring.rabbitmq.ssl.trust-store-password= # Password used to access the trust store. + spring.rabbitmq.username= # Login user to authenticate to the broker. + spring.rabbitmq.virtual-host= # Virtual host to use when connecting to the broker. # REDIS ({sc-spring-boot-autoconfigure}/redis/RedisProperties.{sc-ext}[RedisProperties]) - spring.redis.database= # database name - spring.redis.host=localhost # server host - spring.redis.password= # server password - spring.redis.port=6379 # connection port - spring.redis.pool.max-idle=8 # pool settings ... - spring.redis.pool.min-idle=0 - spring.redis.pool.max-active=8 - spring.redis.pool.max-wait=-1 - spring.redis.sentinel.master= # name of Redis server - spring.redis.sentinel.nodes= # comma-separated list of host:port pairs - spring.redis.timeout= # connection timeout in milliseconds + spring.redis.database=0 # Database index used by the connection factory. + spring.redis.host=localhost # Redis server host. + spring.redis.password= # Login password of the redis server. + spring.redis.pool.max-active=8 # Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit. + spring.redis.pool.max-idle=8 # Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections. + spring.redis.pool.max-wait=-1 # Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely. + spring.redis.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive. + spring.redis.port=6379 # Redis server port. + spring.redis.sentinel.master= # Name of Redis server. + spring.redis.sentinel.nodes= # Comma-separated list of host:port pairs. + spring.redis.timeout=0 # Connection timeout in milliseconds. # ACTIVEMQ ({sc-spring-boot-autoconfigure}/jms/activemq/ActiveMQProperties.{sc-ext}[ActiveMQProperties]) - spring.activemq.broker-url=tcp://localhost:61616 # connection URL - spring.activemq.user= - spring.activemq.password= - spring.activemq.in-memory=true # broker kind to create if no broker-url is specified - spring.activemq.pooled=false + spring.activemq.broker-url= # URL of the ActiveMQ broker. Auto-generated by default. For instance `tcp://localhost:61616` + spring.activemq.in-memory=true # Specify if the default broker URL should be in memory. Ignored if an explicit broker has been specified. + spring.activemq.password= # Login password of the broker. + spring.activemq.pooled=false # Specify if a PooledConnectionFactory should be created instead of a regular ConnectionFactory. + spring.activemq.user= # Login user of the broker. # ARTEMIS ({sc-spring-boot-autoconfigure}/jms/artemis/ArtemisProperties.{sc-ext}[ArtemisProperties]) - spring.artemis.mode= # connection mode (native, embedded) - spring.artemis.host=localhost # hornetQ host (native mode) - spring.artemis.port=5445 # hornetQ port (native mode) - spring.artemis.embedded.enabled=true # if the embedded server is enabled (needs hornetq-jms-server.jar) - spring.artemis.embedded.server-id= # auto-generated id of the embedded server (integer) - spring.artemis.embedded.persistent=false # message persistence - spring.artemis.embedded.data-directory= # location of data content (when persistence is enabled) - spring.artemis.embedded.queues= # comma-separated queues to create on startup - spring.artemis.embedded.topics= # comma-separated topics to create on startup - spring.artemis.embedded.cluster-password= # customer password (randomly generated by default) + spring.artemis.embedded.cluster-password= # Cluster password. Randomly generated on startup by default. + spring.artemis.embedded.data-directory= # Journal file directory. Not necessary if persistence is turned off. + spring.artemis.embedded.enabled=true # Enable embedded mode if the Artemis server APIs are available. + spring.artemis.embedded.persistent=false # Enable persistent store. + spring.artemis.embedded.queues= # Comma-separated list of queues to create on startup. + spring.artemis.embedded.server-id= # Server id. By default, an auto-incremented counter is used. + spring.artemis.embedded.topics= # Comma-separated list of topics to create on startup. + spring.artemis.host=localhost # Artemis broker host. + spring.artemis.mode= # Artemis deployment mode, auto-detected by default. Can be explicitly set to "native" or "embedded". + spring.artemis.port=61616 # Artemis broker port. # HORNETQ ({sc-spring-boot-autoconfigure}/jms/hornetq/HornetQProperties.{sc-ext}[HornetQProperties]) - spring.hornetq.mode= # connection mode (native, embedded) - spring.hornetq.host=localhost # hornetQ host (native mode) - spring.hornetq.port=5445 # hornetQ port (native mode) - spring.hornetq.embedded.enabled=true # if the embedded server is enabled (needs hornetq-jms-server.jar) - spring.hornetq.embedded.server-id= # auto-generated id of the embedded server (integer) - spring.hornetq.embedded.persistent=false # message persistence - spring.hornetq.embedded.data-directory= # location of data content (when persistence is enabled) - spring.hornetq.embedded.queues= # comma-separated queues to create on startup - spring.hornetq.embedded.topics= # comma-separated topics to create on startup - spring.hornetq.embedded.cluster-password= # customer password (randomly generated by default) + spring.hornetq.embedded.cluster-password= # Cluster password. Randomly generated on startup by default. + spring.hornetq.embedded.data-directory= # Journal file directory. Not necessary if persistence is turned off. + spring.hornetq.embedded.enabled=true # Enable embedded mode if the HornetQ server APIs are available. + spring.hornetq.embedded.persistent=false # Enable persistent store. + spring.hornetq.embedded.queues= # Comma-separated list of queues to create on startup. + spring.hornetq.embedded.server-id= # Server id. By default, an auto-incremented counter is used. + spring.hornetq.embedded.topics= # Comma-separated list of topics to create on startup. + spring.hornetq.host=localhost # HornetQ broker host. + spring.hornetq.mode= # HornetQ deployment mode, auto-detected by default. Can be explicitly set to "native" or "embedded". + spring.hornetq.port=5445 # HornetQ broker port. # JMS ({sc-spring-boot-autoconfigure}/jms/JmsProperties.{sc-ext}[JmsProperties]) - spring.jms.jndi-name= # JNDI location of a JMS ConnectionFactory - spring.jms.listener.acknowledge-mode= # session acknowledgment mode - spring.jms.listener.auto-startup=true # start the container automatically on startup - spring.jms.listener.concurrency= # minimum number of concurrent consumers - spring.jms.listener.max-concurrency= # maximum number of concurrent consumers - spring.jms.pub-sub-domain= # false for queue (default), true for topic + spring.jms.jndi-name= # Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations. + spring.jms.listener.acknowledge-mode= # Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment. + spring.jms.listener.auto-startup=true # Start the container automatically on startup. + spring.jms.listener.concurrency= # Minimum number of concurrent consumers. + spring.jms.listener.max-concurrency= # Maximum number of concurrent consumers. + spring.jms.pub-sub-domain=false # Specify if the default destination type is topic. # Email ({sc-spring-boot-autoconfigure}/mail/MailProperties.{sc-ext}[MailProperties]) - spring.mail.host=smtp.acme.org # mail server host - spring.mail.port= # mail server port - spring.mail.protocol=smtp # mail server protocol - spring.mail.username= - spring.mail.password= - spring.mail.default-encoding=UTF-8 # encoding to use for MimeMessages - spring.mail.properties.*= # properties to set on the JavaMail session - spring.mail.jndi-name= # JNDI location of a Mail Session - spring.mail.test-connection=false # Test that the mail server is available on startup + spring.mail.default-encoding=UTF-8 # Default MimeMessage encoding. + spring.mail.host= # SMTP server host. For instance `smtp.example.com` + spring.mail.jndi-name= # Session JNDI name. When set, takes precedence to others mail settings. + spring.mail.password= # Login password of the SMTP server. + spring.mail.port= # SMTP server port. + spring.mail.properties.*= # Additional JavaMail session properties. + spring.mail.protocol=smtp # Protocol used by the SMTP server. + spring.mail.test-connection=false # Test that the mail server is available on startup. + spring.mail.username= # Login user of the SMTP server. # SPRING BATCH ({sc-spring-boot-autoconfigure}/batch/BatchProperties.{sc-ext}[BatchProperties]) - spring.batch.job.names=job1,job2 - spring.batch.job.enabled=true - spring.batch.initializer.enabled=true - spring.batch.schema= # batch schema to load - spring.batch.table-prefix= # table prefix for all the batch meta-data tables + spring.batch.initializer.enabled=true # Create the required batch tables on startup if necessary. + spring.batch.job.enabled=true # Execute all Spring Batch jobs in the context on startup. + spring.batch.job.names= # Comma-separated list of job names to execute on startup (For instance `job1,job2`). By default, all Jobs found in the context are executed. + spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema. + spring.batch.table-prefix= # Table prefix for all the batch meta-data tables. # SPRING CACHE ({sc-spring-boot-autoconfigure}/cache/CacheProperties.{sc-ext}[CacheProperties]) - spring.cache.type= # generic, ehcache, hazelcast, infinispan, jcache, redis, guava, simple, none - spring.cache.cache-names= # cache names to create on startup - spring.cache.ehcache.config= # location of the ehcache configuration - spring.cache.hazelcast.config= # location of the hazelcast configuration - spring.cache.infinispan.config= # location of the infinispan configuration - spring.cache.jcache.config= # location of jcache configuration - spring.cache.jcache.provider= # fully qualified name of the CachingProvider implementation to use - spring.cache.guava.spec= # link:http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/cache/CacheBuilderSpec.html[guava specs] + spring.cache.cache-names= # Comma-separated list of cache names to create if supported by the underlying cache manager. + spring.cache.ehcache.config= # The location of the configuration file to use to initialize EhCache. + spring.cache.guava.spec= # The spec to use to create caches. Check CacheBuilderSpec for more details on the spec format. + spring.cache.hazelcast.config= # The location of the configuration file to use to initialize Hazelcast. + spring.cache.infinispan.config= # The location of the configuration file to use to initialize Infinispan. + spring.cache.jcache.config= # The location of the configuration file to use to initialize the cache manager. + spring.cache.jcache.provider= # Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Only needed if more than one JSR-107 implementation is available on the classpath. + spring.cache.type= # Cache type, auto-detected according to the environment by default. # HAZELCAST ({sc-spring-boot-autoconfigure}/hazelcast/HazelcastProperties.{sc-ext}[HazelcastProperties]) - spring.hazelcast.config= # location of the hazelcast configuration + spring.hazelcast.config= # The location of the configuration file to use to initialize Hazelcast. # AOP - spring.aop.auto= - spring.aop.proxy-target-class= + spring.aop.auto=true # Add @EnableAspectJAutoProxy. + spring.aop.proxy-target-class=false # Whether subclass-based (CGLIB) proxies are to be created (true) as opposed to standard Java interface-based proxies (false). # FILE ENCODING ({sc-spring-boot}/context/FileEncodingApplicationListener.{sc-ext}[FileEncodingApplicationListener]) - spring.mandatory-file-encoding= # Expected character encoding the application must use + spring.mandatory-file-encoding= # Expected character encoding the application must use. # SPRING SOCIAL ({sc-spring-boot-autoconfigure}/social/SocialWebAutoConfiguration.{sc-ext}[SocialWebAutoConfiguration]) - spring.social.auto-connection-views=true # Set to true for default connection views or false if you provide your own + spring.social.auto-connection-views=false # Enable the connection status view for supported providers. # SPRING SOCIAL FACEBOOK ({sc-spring-boot-autoconfigure}/social/FacebookAutoConfiguration.{sc-ext}[FacebookAutoConfiguration]) spring.social.facebook.app-id= # your application's Facebook App ID @@ -655,192 +672,188 @@ content into your application; rather pick only the properties that you need. spring.social.twitter.app-secret= # your application's Twitter App Secret # SPRING MOBILE SITE PREFERENCE ({sc-spring-boot-autoconfigure}/mobile/SitePreferenceAutoConfiguration.{sc-ext}[SitePreferenceAutoConfiguration]) - spring.mobile.sitepreference.enabled=true # enabled by default + spring.mobile.sitepreference.enabled=true # Enable SitePreferenceHandler. # SPRING MOBILE DEVICE VIEWS ({sc-spring-boot-autoconfigure}/mobile/DeviceDelegatingViewResolverAutoConfiguration.{sc-ext}[DeviceDelegatingViewResolverAutoConfiguration]) - spring.mobile.devicedelegatingviewresolver.enabled=true # disabled by default - spring.mobile.devicedelegatingviewresolver.enable-fallback= # enable support for fallback resolution, default to false. - spring.mobile.devicedelegatingviewresolver.normal-prefix= - spring.mobile.devicedelegatingviewresolver.normal-suffix= - spring.mobile.devicedelegatingviewresolver.mobile-prefix=mobile/ - spring.mobile.devicedelegatingviewresolver.mobile-suffix= - spring.mobile.devicedelegatingviewresolver.tablet-prefix=tablet/ - spring.mobile.devicedelegatingviewresolver.tablet-suffix= + spring.mobile.devicedelegatingviewresolver.enable-fallback=false # Enable support for fallback resolution. + spring.mobile.devicedelegatingviewresolver.enabled=false # Enable device view resolver. + spring.mobile.devicedelegatingviewresolver.mobile-prefix=mobile/ # Prefix that gets prepended to view names for mobile devices. + spring.mobile.devicedelegatingviewresolver.mobile-suffix= # Suffix that gets appended to view names for mobile devices. + spring.mobile.devicedelegatingviewresolver.normal-prefix= # Prefix that gets prepended to view names for normal devices. + spring.mobile.devicedelegatingviewresolver.normal-suffix= # Suffix that gets appended to view names for normal devices. + spring.mobile.devicedelegatingviewresolver.tablet-prefix=tablet/ # Prefix that gets prepended to view names for tablet devices. + spring.mobile.devicedelegatingviewresolver.tablet-suffix= # Suffix that gets appended to view names for tablet devices. # ---------------------------------------- # DEVTOOLS PROPERTIES # ---------------------------------------- - # DEVTOOLS ({sc-spring-boot-devtools}/autoconfigure/DevToolsProperties.{sc-ext}[DevToolsProperties]) - spring.devtools.restart.additional-paths= # additional paths to watch for changes - spring.devtools.restart.enabled=true # enable automatic restart - spring.devtools.restart.exclude= # patterns that should be excluded from triggering a full restart - spring.devtools.restart.additional-exclude= # additional patterns that should be excluded from triggering a full restart - spring.devtools.restart.poll-interval= # amount of time (in milliseconds) to wait between polling for classpath changes - spring.devtools.restart.quiet-period= # amount of quiet time (in milliseconds) required without any classpath changes before a restart is triggered - spring.devtools.restart.trigger-file= # name of a specific file that when changed will trigger the restart - spring.devtools.livereload.enabled=true # enable a livereload.com compatible server - spring.devtools.livereload.port=35729 # server port. + # DEVTOOLS ({sc-spring-boot-devtools}/autoconfigure/DevToolsProperties.{sc-ext}[DevToolsProperties]) + spring.devtools.livereload.enabled=true # Enable a livereload.com compatible server. + spring.devtools.livereload.port=35729 # Server port. + spring.devtools.restart.additional-exclude= # Additional patterns that should be excluded from triggering a full restart. + spring.devtools.restart.additional-paths= # Additional paths to watch for changes. + spring.devtools.restart.enabled=true # Enable automatic restart. + spring.devtools.restart.exclude=META-INF/maven/**,META-INF/resources/**,resources/**,static/**,public/**,templates/**,**/*Test.class,**/*Tests.class,git.properties # Patterns that should be excluded from triggering a full restart. + spring.devtools.restart.poll-interval=1000 # Amount of time (in milliseconds) to wait between polling for classpath changes. + spring.devtools.restart.quiet-period=400 # Amount of quiet time (in milliseconds) required without any classpath changes before a restart is triggered. + spring.devtools.restart.trigger-file= # Name of a specific file that when changed will trigger the restart check. If not specified any classpath file change will trigger the restart. - # REMOTE DEVTOOLS ({sc-spring-boot-devtools}/autoconfigure/RemoteDevToolsProperties.{sc-ext}[RemoteDevToolsProperties]) - spring.devtools.remote.context-path=/.~~spring-boot!~ # context path used to handle the remote connection - spring.devtools.remote.debug.enabled=true # enable remote debug support - spring.devtools.remote.debug.local-port=8000 # local remote debug server port - spring.devtools.remote.proxy.host= # the host of the proxy to use to connect to the remote application - spring.devtools.remote.proxy.port= # the port of the proxy to use to connect to the remote application - spring.devtools.remote.restart.enabled=true # enable remote restart - spring.devtools.remote.secret= # a shared secret required to establish a connection - spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret + # REMOTE DEVTOOLS ({sc-spring-boot-devtools}/autoconfigure/RemoteDevToolsProperties.{sc-ext}[RemoteDevToolsProperties]) + spring.devtools.remote.context-path=/.~~spring-boot!~ # Context path used to handle the remote connection. + spring.devtools.remote.debug.enabled=true # Enable remote debug support. + spring.devtools.remote.debug.local-port=8000 # Local remote debug server port. + spring.devtools.remote.proxy.host= # The host of the proxy to use to connect to the remote application. + spring.devtools.remote.proxy.port= # The port of the proxy to use to connect to the remote application. + spring.devtools.remote.restart.enabled=true # Enable remote restart. + spring.devtools.remote.secret= # A shared secret required to establish a connection (required to enable remote support). + spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret. # ---------------------------------------- # ACTUATOR PROPERTIES # ---------------------------------------- # MANAGEMENT HTTP SERVER ({sc-spring-boot-actuator}/autoconfigure/ManagementServerProperties.{sc-ext}[ManagementServerProperties]) - management.port= # defaults to 'server.port' - management.address= # bind to a specific NIC - management.context-path= # default to '/' - management.add-application-context-header= # default to true - management.security.enabled=true # enable security - management.security.role=ADMIN # role required to access the management endpoint - management.security.sessions=stateless # session creating policy to use (always, never, if_required, stateless) + management.add-application-context-header=true # Add the "X-Application-Context" HTTP header in each response. + management.address= # Network address that the management endpoints should bind to. + management.context-path= # Management endpoint context-path. For instance `/actuator` + management.port= # Management endpoint HTTP port. Use the same port as the application by default. + management.security.enabled=true # Enable security. + management.security.role=ADMIN # Role required to access the management endpoint. + management.security.sessions=stateless # Session creating policy to use (always, never, if_required, stateless). # PID FILE ({sc-spring-boot-actuator}/system/ApplicationPidFileWriter.{sc-ext}[ApplicationPidFileWriter]) - spring.pid.file= # Location of the PID file to write - spring.pid.fail-on-write-error= # Fail if the PID file cannot be written + spring.pid.fail-on-write-error= # Fail if ApplicationPidFileWriter is used but it cannot write the PID file. + spring.pid.file= # Location of the PID file to write (if ApplicationPidFileWriter is used). # ENDPOINTS ({sc-spring-boot-actuator}/endpoint/AbstractEndpoint.{sc-ext}[AbstractEndpoint] subclasses) - endpoints.autoconfig.id=autoconfig - endpoints.autoconfig.sensitive=true - endpoints.autoconfig.enabled=true - endpoints.beans.id=beans - endpoints.beans.sensitive=true - endpoints.beans.enabled=true - endpoints.configprops.id=configprops - endpoints.configprops.sensitive=true - endpoints.configprops.enabled=true - endpoints.configprops.keys-to-sanitize=password,secret,key,.*credentials.*,vcap_services # suffix or regex - endpoints.dump.id=dump - endpoints.dump.sensitive=true - endpoints.dump.enabled=true - endpoints.enabled=true # enable all endpoints - endpoints.env.id=env - endpoints.env.sensitive=true - endpoints.env.enabled=true - endpoints.env.keys-to-sanitize=password,secret,key,.*credentials.*,vcap_services # suffix or regex - endpoints.health.id=health - endpoints.health.sensitive=true - endpoints.health.enabled=true - endpoints.health.mapping.*= # mapping of health statuses to HttpStatus codes - endpoints.health.time-to-live=1000 - endpoints.info.id=info - endpoints.info.sensitive=false - endpoints.info.enabled=true - endpoints.logfile.path=/logfile - endpoints.logfile.sensitive=true - endpoints.logfile.enabled=true - endpoints.mappings.enabled=true - endpoints.mappings.id=mappings - endpoints.mappings.sensitive=true - endpoints.metrics.id=metrics - endpoints.metrics.sensitive=true - endpoints.metrics.enabled=true - endpoints.shutdown.id=shutdown - endpoints.shutdown.sensitive=true - endpoints.shutdown.enabled=false - endpoints.trace.id=trace - endpoints.trace.sensitive=true - endpoints.trace.enabled=true - - # HYPERMEDIA ENDPOINTS - endpoints.actuator.enabled=true - endpoints.actuator.path=/actuator - endpoints.actuator.sensitive=false - endpoints.docs.curies.enabled=false - endpoints.docs.enabled=true - endpoints.docs.path=/docs - endpoints.docs.sensitive=false - endpoints.flyway.enabled=true - endpoints.flyway.id=flyway - endpoints.flyway.sensitive=true - endpoints.liquibase.enabled=true - endpoints.liquibase.id=liquibase - endpoints.liquibase.sensitive=false + endpoints.actuator.enabled=true # Enable the endpoint. + endpoints.actuator.path= # Endpoint URL path. + endpoints.actuator.sensitive=false # Enable security on the endpoint. + endpoints.autoconfig.enabled= # Enable the endpoint. + endpoints.autoconfig.id= # Endpoint identifier. + endpoints.autoconfig.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.beans.enabled= # Enable the endpoint. + endpoints.beans.id= # Endpoint identifier. + endpoints.beans.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.configprops.enabled= # Enable the endpoint. + endpoints.configprops.id= # Endpoint identifier. + endpoints.configprops.keys-to-sanitize=password,secret,key,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions. + endpoints.configprops.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.docs.curies.enabled=false # Enable the curie generation. + endpoints.docs.enabled=true # Enable actuator docs endpoint. + endpoints.docs.path=/docs # + endpoints.docs.sensitive=false # + endpoints.dump.enabled= # Enable the endpoint. + endpoints.dump.id= # Endpoint identifier. + endpoints.dump.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.enabled=true # Enable endpoints. + endpoints.env.enabled= # Enable the endpoint. + endpoints.env.id= # Endpoint identifier. + endpoints.env.keys-to-sanitize=password,secret,key,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions. + endpoints.env.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.flyway.enabled= # Enable the endpoint. + endpoints.flyway.id= # Endpoint identifier. + endpoints.flyway.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.health.enabled= # Enable the endpoint. + endpoints.health.id= # Endpoint identifier. + endpoints.health.mapping.*= # Mapping of health statuses to HttpStatus codes. By default, registered health statuses map to sensible defaults (i.e. UP maps to 200). + endpoints.health.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.health.time-to-live=1000 # Time to live for cached result, in milliseconds. + endpoints.info.enabled= # Enable the endpoint. + endpoints.info.id= # Endpoint identifier. + endpoints.info.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.jolokia.enabled=true # Enable Jolokia endpoint. + endpoints.jolokia.path=/jolokia # Endpoint URL path. + endpoints.jolokia.sensitive=true # Enable security on the endpoint. + endpoints.liquibase.enabled= # Enable the endpoint. + endpoints.liquibase.id= # Endpoint identifier. + endpoints.liquibase.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.logfile.enabled=true # Enable the endpoint. + endpoints.logfile.path=/logfile # Endpoint URL path. + endpoints.logfile.sensitive=true # Enable security on the endpoint. + endpoints.mappings.enabled= # Enable the endpoint. + endpoints.mappings.id= # Endpoint identifier. + endpoints.mappings.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.metrics.enabled= # Enable the endpoint. + endpoints.metrics.id= # Endpoint identifier. + endpoints.metrics.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.shutdown.enabled= # Enable the endpoint. + endpoints.shutdown.id= # Endpoint identifier. + endpoints.shutdown.sensitive= # Mark if the endpoint exposes sensitive information. + endpoints.trace.enabled= # Enable the endpoint. + endpoints.trace.id= # Endpoint identifier. + endpoints.trace.sensitive= # Mark if the endpoint exposes sensitive information. # ENDPOINTS CORS CONFIGURATION ({sc-spring-boot-actuator}/autoconfigure/EndpointCorsProperties.{sc-ext}[EndpointCorsProperties]) - endpoints.cors.allow-credentials= # set whether user credentials are support. When not set, credentials are not supported. - endpoints.cors.allowed-origins= # comma-separated list of origins to allow. * allows all origins. When not set, CORS support is disabled. - endpoints.cors.allowed-methods= # comma-separated list of methods to allow. * allows all methods. When not set, defaults to GET. - endpoints.cors.allowed-headers= # comma-separated list of headers to allow in a request. * allows all headers. - endpoints.cors.exposed-headers= # comma-separated list of headers to include in a response. - endpoints.cors.max-age=1800 # how long, in seconds, the response from a pre-flight request can be cached by clients. + endpoints.cors.allow-credentials= # Set whether credentials are supported. When not set, credentials are not supported. + endpoints.cors.allowed-headers= # Comma-separated list of headers to allow in a request. '*' allows all headers. + endpoints.cors.allowed-methods=GET # Comma-separated list of methods to allow. '*' allows all methods. + endpoints.cors.allowed-origins= # Comma-separated list of origins to allow. '*' allows all origins. When not set, CORS support is disabled. + endpoints.cors.exposed-headers= # Comma-separated list of headers to include in a response. + endpoints.cors.max-age=1800 # How long, in seconds, the response from a pre-flight request can be cached by clients. # HEALTH INDICATORS (previously health.*) - management.health.db.enabled=true - management.health.defaults.enabled=true # enable default health indicators - management.health.diskspace.enabled=true - management.health.diskspace.path=. - management.health.diskspace.threshold=10485760 - management.health.elasticsearch.enabled=true - management.health.elasticsearch.indices= # comma-separated index names - management.health.elasticsearch.response-timeout=100 # the time, in milliseconds, to wait for a response from the cluster - management.health.jms.enabled=true - management.health.mail.enabled=true - management.health.mongo.enabled=true - management.health.rabbit.enabled=true - management.health.redis.enabled=true - management.health.solr.enabled=true - management.health.status.order=DOWN, OUT_OF_SERVICE, UNKNOWN, UP + management.health.db.enabled=true # Enable database health check. + management.health.defaults.enabled=true # Enable default health indicators. + management.health.diskspace.enabled=true # Enable disk space health check. + management.health.diskspace.path= # Path used to compute the available disk space. + management.health.diskspace.threshold=0 # Minimum disk space that should be available, in bytes. + management.health.elasticsearch.enabled=true # Enable elasticsearch health check. + management.health.elasticsearch.indices= # Comma-separated index names. + management.health.elasticsearch.response-timeout=100 # The time, in milliseconds, to wait for a response from the cluster. + management.health.jms.enabled=true # Enable JMS health check. + management.health.mail.enabled=true # Enable Mail health check. + management.health.mongo.enabled=true # Enable MongoDB health check. + management.health.rabbit.enabled=true # Enable RabbitMQ health check. + management.health.redis.enabled=true # Enable Redis health check. + management.health.solr.enabled=true # Enable Solr health check. + management.health.status.order=DOWN, OUT_OF_SERVICE, UNKNOWN, UP # Comma-separated list of health statuses in order of severity. # TRACING (({sc-spring-boot-actuator}/trace/TraceProperties.{sc-ext}[TraceProperties]) - management.trace.include=request-headers,response-headers,errors # See TraceProperties.Include for options - - # MVC ONLY ENDPOINTS - endpoints.jolokia.path=/jolokia - endpoints.jolokia.sensitive=true - endpoints.jolokia.enabled=true # when using Jolokia + management.trace.include=request-headers,response-headers,errors # Items to be included in the trace. # JMX ENDPOINT ({sc-spring-boot-actuator}/autoconfigure/EndpointMBeanExportProperties.{sc-ext}[EndpointMBeanExportProperties]) - endpoints.jmx.enabled=true # enable JMX export of all endpoints - endpoints.jmx.domain= # the JMX domain, defaults to 'org.springboot' - endpoints.jmx.unique-names=false - endpoints.jmx.static-names= + endpoints.jmx.domain= # JMX domain name. Initialized with the value of 'spring.jmx.default-domain' if set. + endpoints.jmx.enabled=true # Enable JMX export of all endpoints. + endpoints.jmx.static-names= # Additional static properties to append to all ObjectNames of MBeans representing Endpoints. + endpoints.jmx.unique-names=false # Ensure that ObjectNames are modified in case of conflict. # JOLOKIA ({sc-spring-boot-actuator}/autoconfigure/JolokiaProperties.{sc-ext}[JolokiaProperties]) jolokia.config.*= # See Jolokia manual # REMOTE SHELL - shell.auth=simple # jaas, key, simple, spring - shell.command-refresh-interval=-1 - shell.command-path-patterns= # classpath*:/commands/**, classpath*:/crash/commands/** - shell.config-path-patterns= # classpath*:/crash/* - shell.disabled-commands=jpa*,jdbc*,jndi* # comma-separated list of commands to disable - shell.disabled-plugins=false # don't expose plugins - shell.ssh.enabled= # ssh settings ... - shell.ssh.key-path= - shell.ssh.port= - shell.telnet.enabled= # telnet settings ... - shell.telnet.port= - shell.auth.jaas.domain= # authentication settings ... - shell.auth.key.path= - shell.auth.simple.user.name= - shell.auth.simple.user.password= - shell.auth.spring.roles= + shell.auth=simple # Authentication type. Auto-detected according to the environment. + shell.auth.jaas.domain=my-domain # JAAS domain. + shell.auth.key.path= # Path to the authentication key. This should point to a valid ".pem" file. + shell.auth.simple.user.name=user # Login user. + shell.auth.simple.user.password= # Login password. + shell.auth.spring.roles=ADMIN # Comma-separated list of required roles to login to the CRaSH console. + shell.command-path-patterns=classpath*:/commands/**,classpath*:/crash/commands/** # Patterns to use to look for commands. + shell.command-refresh-interval=-1 # Scan for changes and update the command if necessary (in seconds). + shell.config-path-patterns=classpath*:/crash/* # Patterns to use to look for configurations. + shell.disabled-commands=jpa*,jdbc*,jndi* # Comma-separated list of commands to disable. + shell.disabled-plugins= # Comma-separated list of plugins to disable. Certain plugins are disabled by default based on the environment. + shell.ssh.enabled=true # Enable CRaSH SSH support. + shell.ssh.key-path= # Path to the SSH server key. + shell.ssh.port=2000 # SSH port. + shell.telnet.enabled=false # Enable CRaSH telnet support. Enabled by default if the TelnetPlugin is available. + shell.telnet.port=5000 # Telnet port. # METRICS EXPORT ({sc-spring-boot-actuator}/metrics/export/MetricExportProperties.{sc-ext}[MetricExportProperties]) - spring.metrics.export.aggregate.key-pattern= # pattern that tells the aggregator what to do with the keys from the source repository - spring.metrics.export.aggregate.prefix= # prefix for global repository if active - spring.metrics.export.enabled=true # flag to disable all metric exports (assuming any MetricWriters are available) - spring.metrics.export.delay-millis=5000 # delay in milliseconds between export ticks - spring.metrics.export.send-latest=true # flag to switch off any available optimizations based on not exporting unchanged metric values - spring.metrics.export.includes= # list of patterns for metric names to include - spring.metrics.export.excludes= # list of patterns for metric names to exclude. Applied after the includes - spring.metrics.export.redis.prefix=spring.metrics # prefix for redis repository if active - spring.metrics.export.redis.key=keys.spring.metrics # key for redis repository export (if active) - spring.metrics.export.statsd.host= # host of the statsd server - spring.metrics.export.statsd.port=8125 # port of the statsd server - spring.metrics.export.statsd.prefix= # prefix for exported metrics - spring.metrics.export.triggers.*= # specific trigger properties per MetricWriter bean name + spring.metrics.export.aggregate.key-pattern= # Pattern that tells the aggregator what to do with the keys from the source repository. + spring.metrics.export.aggregate.prefix= # Prefix for global repository if active. + spring.metrics.export.delay-millis=5000 # Delay in milliseconds between export ticks. Metrics are exported to external sources on a schedule with this delay. + spring.metrics.export.enabled=true # Flag to enable metric export (assuming a MetricWriter is available). + spring.metrics.export.excludes= # List of patterns for metric names to exclude. Applied after the includes. + spring.metrics.export.includes= # List of patterns for metric names to include. + spring.metrics.export.redis.key=keys.spring.metrics # Key for redis repository export (if active). + spring.metrics.export.redis.prefix=spring.metrics # Prefix for redis repository if active. + spring.metrics.export.send-latest= # Flag to switch off any available optimizations based on not exporting unchanged metric values. + spring.metrics.export.statsd.host= # Host of a statsd server to receive exported metrics. + spring.metrics.export.statsd.port=8125 # Port of a statsd server to receive exported metrics. + spring.metrics.export.statsd.prefix= # Prefix for statsd exported metrics. + spring.metrics.export.triggers.*= # Specific trigger properties per MetricWriter bean name. # SENDGRID ({sc-spring-boot-autoconfigure}/sendgrid/SendGridAutoConfiguration.{sc-ext}[SendGridAutoConfiguration]) spring.sendgrid.username= # SendGrid account username @@ -849,5 +862,5 @@ content into your application; rather pick only the properties that you need. spring.sendgrid.proxy.port= # SendGrid proxy port # GIT INFO - spring.git.properties= # resource ref to generated git info properties file + spring.git.properties= # Resource reference to a generated git info properties file. ----