From 0315e360e71ab4306b7f67164eebe0f6545cbf38 Mon Sep 17 00:00:00 2001 From: Mark Paluch Date: Wed, 30 Nov 2016 09:21:20 +0100 Subject: [PATCH] DATACASS-363 - Add import order config file. Delete also attic directory since it's not required anymore. --- attic/cassandra/conf/cassandra.yaml | 664 ---------------------------- attic/get-and-start-cassandra | 23 - attic/gradle/build.gradle | 231 ---------- attic/gradle/gradle.properties | 26 -- attic/gradle/maven.gradle | 63 --- attic/gradle/settings.gradle | 1 - etc/springdata.importorder | 8 + 7 files changed, 8 insertions(+), 1008 deletions(-) delete mode 100644 attic/cassandra/conf/cassandra.yaml delete mode 100755 attic/get-and-start-cassandra delete mode 100644 attic/gradle/build.gradle delete mode 100644 attic/gradle/gradle.properties delete mode 100644 attic/gradle/maven.gradle delete mode 100644 attic/gradle/settings.gradle create mode 100644 etc/springdata.importorder diff --git a/attic/cassandra/conf/cassandra.yaml b/attic/cassandra/conf/cassandra.yaml deleted file mode 100644 index c6c96f715..000000000 --- a/attic/cassandra/conf/cassandra.yaml +++ /dev/null @@ -1,664 +0,0 @@ -# Cassandra storage config YAML - -# NOTE: -# See http://wiki.apache.org/cassandra/StorageConfiguration for -# full explanations of configuration directives -# /NOTE - -# The name of the cluster. This is mainly used to prevent machines in -# one logical cluster from joining another. -cluster_name: 'Test Cluster' - -# This defines the number of tokens randomly assigned to this node on the ring -# The more tokens, relative to other nodes, the larger the proportion of data -# that this node will store. You probably want all nodes to have the same number -# of tokens assuming they have equal hardware capability. -# -# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility, -# and will use the initial_token as described below. -# -# Specifying initial_token will override this setting. -# -# If you already have a cluster with 1 token per node, and wish to migrate to -# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations -num_tokens: 256 - -# initial_token allows you to specify tokens manually. While you can use # it with -# vnodes (num_tokens > 1, above) -- in which case you should provide a -# comma-separated list -- it's primarily used when adding nodes # to legacy clusters -# that do not have vnodes enabled. -# initial_token: - -# See http://wiki.apache.org/cassandra/HintedHandoff -hinted_handoff_enabled: true -# this defines the maximum amount of time a dead host will have hints -# generated. After it has been dead this long, new hints for it will not be -# created until it has been seen alive and gone down again. -max_hint_window_in_ms: 10800000 # 3 hours -# Maximum throttle in KBs per second, per delivery thread. This will be -# reduced proportionally to the number of nodes in the cluster. (If there -# are two nodes in the cluster, each delivery thread will use the maximum -# rate; if there are three, each will throttle to half of the maximum, -# since we expect two nodes to be delivering hints simultaneously.) -hinted_handoff_throttle_in_kb: 1024 -# Number of threads with which to deliver hints; -# Consider increasing this number when you have multi-dc deployments, since -# cross-dc handoff tends to be slower -max_hints_delivery_threads: 2 - -# The following setting populates the page cache on memtable flush and compaction -# WARNING: Enable this setting only when the whole node's data fits in memory. -# Defaults to: false -# populate_io_cache_on_flush: false - -# Authentication backend, implementing IAuthenticator; used to identify users -# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator, -# PasswordAuthenticator}. -# -# - AllowAllAuthenticator performs no checks - set it to disable authentication. -# - PasswordAuthenticator relies on username/password pairs to authenticate -# users. It keeps usernames and hashed passwords in system_auth.credentials table. -# Please increase system_auth keyspace replication factor if you use this authenticator. -authenticator: AllowAllAuthenticator - -# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions -# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer, -# CassandraAuthorizer}. -# -# - AllowAllAuthorizer allows any action to any user - set it to disable authorization. -# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please -# increase system_auth keyspace replication factor if you use this authorizer. -authorizer: AllowAllAuthorizer - -# Validity period for permissions cache (fetching permissions can be an -# expensive operation depending on the authorizer, CassandraAuthorizer is -# one example). Defaults to 2000, set to 0 to disable. -# Will be disabled automatically for AllowAllAuthorizer. -permissions_validity_in_ms: 2000 - -# The partitioner is responsible for distributing rows (by key) across -# nodes in the cluster. Any IPartitioner may be used, including your -# own as long as it is on the classpath. Out of the box, Cassandra -# provides org.apache.cassandra.dht.{Murmur3Partitioner, RandomPartitioner -# ByteOrderedPartitioner, OrderPreservingPartitioner (deprecated)}. -# -# - RandomPartitioner distributes rows across the cluster evenly by md5. -# This is the default prior to 1.2 and is retained for compatibility. -# - Murmur3Partitioner is similar to RandomPartioner but uses Murmur3_128 -# Hash Function instead of md5. When in doubt, this is the best option. -# - ByteOrderedPartitioner orders rows lexically by key bytes. BOP allows -# scanning rows in key order, but the ordering can generate hot spots -# for sequential insertion workloads. -# - OrderPreservingPartitioner is an obsolete form of BOP, that stores -# - keys in a less-efficient format and only works with keys that are -# UTF8-encoded Strings. -# - CollatingOPP collates according to EN,US rules rather than lexical byte -# ordering. Use this as an example if you need custom collation. -# -# See http://wiki.apache.org/cassandra/Operations for more on -# partitioners and token selection. -partitioner: org.apache.cassandra.dht.Murmur3Partitioner - -# Directories where Cassandra should store data on disk. Cassandra -# will spread data evenly across them, subject to the granularity of -# the configured compaction strategy. -data_file_directories: - - .cassandra/var/lib/cassandra/data - -# commit log -commitlog_directory: .cassandra/var/lib/cassandra/commitlog - -# policy for data disk failures: -# stop: shut down gossip and Thrift, leaving the node effectively dead, but -# can still be inspected via JMX. -# best_effort: stop using the failed disk and respond to requests based on -# remaining available sstables. This means you WILL see obsolete -# data at CL.ONE! -# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra -disk_failure_policy: stop - -# Maximum size of the key cache in memory. -# -# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the -# minimum, sometimes more. The key cache is fairly tiny for the amount of -# time it saves, so it's worthwhile to use it at large numbers. -# The row cache saves even more time, but must contain the entire row, -# so it is extremely space-intensive. It's best to only use the -# row cache if you have hot rows or static rows. -# -# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. -# -# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache. -key_cache_size_in_mb: - -# Duration in seconds after which Cassandra should -# save the key cache. Caches are saved to saved_caches_directory as -# specified in this configuration file. -# -# Saved caches greatly improve cold-start speeds, and is relatively cheap in -# terms of I/O for the key cache. Row cache saving is much more expensive and -# has limited use. -# -# Default is 14400 or 4 hours. -key_cache_save_period: 14400 - -# Number of keys from the key cache to save -# Disabled by default, meaning all keys are going to be saved -# key_cache_keys_to_save: 100 - -# Maximum size of the row cache in memory. -# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. -# -# Default value is 0, to disable row caching. -row_cache_size_in_mb: 0 - -# Duration in seconds after which Cassandra should -# safe the row cache. Caches are saved to saved_caches_directory as specified -# in this configuration file. -# -# Saved caches greatly improve cold-start speeds, and is relatively cheap in -# terms of I/O for the key cache. Row cache saving is much more expensive and -# has limited use. -# -# Default is 0 to disable saving the row cache. -row_cache_save_period: 0 - -# Number of keys from the row cache to save -# Disabled by default, meaning all keys are going to be saved -# row_cache_keys_to_save: 100 - -# The off-heap memory allocator. Affects storage engine metadata as -# well as caches. Experiments show that JEMAlloc saves some memory -# than the native GCC allocator (i.e., JEMalloc is more -# fragmentation-resistant). -# -# Supported values are: NativeAllocator, JEMallocAllocator -# -# If you intend to use JEMallocAllocator you have to install JEMalloc as library and -# modify cassandra-env.sh as directed in the file. -# -# Defaults to NativeAllocator -# memory_allocator: NativeAllocator - -# saved caches -saved_caches_directory: .cassandra/var/lib/cassandra/saved_caches - -# commitlog_sync may be either "periodic" or "batch." -# When in batch mode, Cassandra won't ack writes until the commit log -# has been fsynced to disk. It will wait up to -# commitlog_sync_batch_window_in_ms milliseconds for other writes, before -# performing the sync. -# -# commitlog_sync: batch -# commitlog_sync_batch_window_in_ms: 50 -# -# the other option is "periodic" where writes may be acked immediately -# and the CommitLog is simply synced every commitlog_sync_period_in_ms -# milliseconds. By default this allows 1024*(CPU cores) pending -# entries on the commitlog queue. If you are writing very large blobs, -# you should reduce that; 16*cores works reasonably well for 1MB blobs. -# It should be at least as large as the concurrent_writes setting. -commitlog_sync: periodic -commitlog_sync_period_in_ms: 10000 -# commitlog_periodic_queue_size: - -# The size of the individual commitlog file segments. A commitlog -# segment may be archived, deleted, or recycled once all the data -# in it (potentially from each columnfamily in the system) has been -# flushed to sstables. -# -# The default size is 32, which is almost always fine, but if you are -# archiving commitlog segments (see commitlog_archiving.properties), -# then you probably want a finer granularity of archiving; 8 or 16 MB -# is reasonable. -commitlog_segment_size_in_mb: 32 - -# any class that implements the SeedProvider interface and has a -# constructor that takes a Map of parameters will do. -seed_provider: - # Addresses of hosts that are deemed contact points. - # Cassandra nodes use this list of hosts to find each other and learn - # the topology of the ring. You must change this if you are running - # multiple nodes! - - class_name: org.apache.cassandra.locator.SimpleSeedProvider - parameters: - # seeds is actually a comma-delimited list of addresses. - # Ex: ",," - - seeds: "127.0.0.1" - -# For workloads with more data than can fit in memory, Cassandra's -# bottleneck will be reads that need to fetch data from -# disk. "concurrent_reads" should be set to (16 * number_of_drives) in -# order to allow the operations to enqueue low enough in the stack -# that the OS and drives can reorder them. -# -# On the other hand, since writes are almost never IO bound, the ideal -# number of "concurrent_writes" is dependent on the number of cores in -# your system; (8 * number_of_cores) is a good rule of thumb. -concurrent_reads: 32 -concurrent_writes: 32 - -# Total memory to use for sstable-reading buffers. Defaults to -# the smaller of 1/4 of heap or 512MB. -# file_cache_size_in_mb: 512 - -# Total memory to use for memtables. Cassandra will flush the largest -# memtable when this much memory is used. -# If omitted, Cassandra will set it to 1/3 of the heap. -# memtable_total_space_in_mb: 2048 - -# Total space to use for commitlogs. Since commitlog segments are -# mmapped, and hence use up address space, the default size is 32 -# on 32-bit JVMs, and 1024 on 64-bit JVMs. -# -# If space gets above this value (it will round up to the next nearest -# segment multiple), Cassandra will flush every dirty CF in the oldest -# segment and remove it. So a small total commitlog space will tend -# to cause more flush activity on less-active columnfamilies. -# commitlog_total_space_in_mb: 4096 - -# This sets the amount of memtable flush writer threads. These will -# be blocked by disk io, and each one will hold a memtable in memory -# while blocked. If you have a large heap and many data directories, -# you can increase this value for better flush performance. -# By default this will be set to the amount of data directories defined. -#memtable_flush_writers: 1 - -# the number of full memtables to allow pending flush, that is, -# waiting for a writer thread. At a minimum, this should be set to -# the maximum number of secondary indexes created on a single CF. -memtable_flush_queue_size: 4 - -# Whether to, when doing sequential writing, fsync() at intervals in -# order to force the operating system to flush the dirty -# buffers. Enable this to avoid sudden dirty buffer flushing from -# impacting read latencies. Almost always a good idea on SSDs; not -# necessarily on platters. -trickle_fsync: false -trickle_fsync_interval_in_kb: 10240 - -# TCP port, for commands and data -storage_port: 7000 - -# SSL port, for encrypted communication. Unused unless enabled in -# encryption_options -ssl_storage_port: 7001 - -# Address to bind to and tell other Cassandra nodes to connect to. You -# _must_ change this if you want multiple nodes to be able to -# communicate! -# -# Leaving it blank leaves it up to InetAddress.getLocalHost(). This -# will always do the Right Thing _if_ the node is properly configured -# (hostname, name resolution, etc), and the Right Thing is to use the -# address associated with the hostname (it might not be). -# -# Setting this to 0.0.0.0 is always wrong. -listen_address: localhost - -# Address to broadcast to other Cassandra nodes -# Leaving this blank will set it to the same value as listen_address -# broadcast_address: 1.2.3.4 - -# Internode authentication backend, implementing IInternodeAuthenticator; -# used to allow/disallow connections from peer nodes. -# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator - -# Whether to start the native transport server. -# Please note that the address on which the native transport is bound is the -# same as the rpc_address. The port however is different and specified below. -start_native_transport: true -# port for the CQL native transport to listen for clients on -native_transport_port: 9042 -# The maximum threads for handling requests when the native transport is used. -# This is similar to rpc_max_threads though the default differs slightly (and -# there is no native_transport_min_threads, idle threads will always be stopped -# after 30 seconds). -# native_transport_max_threads: 128 - -# Whether to start the thrift rpc server. -start_rpc: true - -# The address to bind the Thrift RPC service and native transport -# server -- clients connect here. -# -# Leaving this blank has the same effect it does for ListenAddress, -# (i.e. it will be based on the configured hostname of the node). -# -# Note that unlike ListenAddress above, it is allowed to specify 0.0.0.0 -# here if you want to listen on all interfaces but is not best practice -# as it is known to confuse the node auto-discovery features of some -# client drivers. -rpc_address: localhost -# port for Thrift to listen for clients on -rpc_port: 9160 - -# enable or disable keepalive on rpc connections -rpc_keepalive: true - -# Cassandra provides three out-of-the-box options for the RPC Server: -# -# sync -> One thread per thrift connection. For a very large number of clients, memory -# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size -# per thread, and that will correspond to your use of virtual memory (but physical memory -# may be limited depending on use of stack space). -# -# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled -# asynchronously using a small number of threads that does not vary with the amount -# of thrift clients (and thus scales well to many clients). The rpc requests are still -# synchronous (one thread per active request). -# -# The default is sync because on Windows hsha is about 30% slower. On Linux, -# sync/hsha performance is about the same, with hsha of course using less memory. -# -# Alternatively, can provide your own RPC server by providing the fully-qualified class name -# of an o.a.c.t.TServerFactory that can create an instance of it. -rpc_server_type: sync - -# Uncomment rpc_min|max_thread to set request pool size limits. -# -# Regardless of your choice of RPC server (see above), the number of maximum requests in the -# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync -# RPC server, it also dictates the number of clients that can be connected at all). -# -# The default is unlimited and thus provides no protection against clients overwhelming the server. You are -# encouraged to set a maximum that makes sense for you in production, but do keep in mind that -# rpc_max_threads represents the maximum number of client requests this server may execute concurrently. -# -# rpc_min_threads: 16 -# rpc_max_threads: 2048 - -# uncomment to set socket buffer sizes on rpc connections -# rpc_send_buff_size_in_bytes: -# rpc_recv_buff_size_in_bytes: - -# Uncomment to set socket buffer size for internode communication -# Note that when setting this, the buffer size is limited by net.core.wmem_max -# and when not setting it it is defined by net.ipv4.tcp_wmem -# See: -# /proc/sys/net/core/wmem_max -# /proc/sys/net/core/rmem_max -# /proc/sys/net/ipv4/tcp_wmem -# /proc/sys/net/ipv4/tcp_wmem -# and: man tcp -# internode_send_buff_size_in_bytes: -# internode_recv_buff_size_in_bytes: - -# Frame size for thrift (maximum message length). -thrift_framed_transport_size_in_mb: 15 - -# Set to true to have Cassandra create a hard link to each sstable -# flushed or streamed locally in a backups/ subdirectory of the -# keyspace data. Removing these links is the operator's -# responsibility. -incremental_backups: false - -# Whether or not to take a snapshot before each compaction. Be -# careful using this option, since Cassandra won't clean up the -# snapshots for you. Mostly useful if you're paranoid when there -# is a data format change. -snapshot_before_compaction: false - -# Whether or not a snapshot is taken of the data before keyspace truncation -# or dropping of column families. The STRONGLY advised default of true -# should be used to provide data safety. If you set this flag to false, you will -# lose data on truncation or drop. -auto_snapshot: true - -# Add column indexes to a row after its contents reach this size. -# Increase if your column values are large, or if you have a very large -# number of columns. The competing causes are, Cassandra has to -# deserialize this much of the row to read a single column, so you want -# it to be small - at least if you do many partial-row reads - but all -# the index data is read for each access, so you don't want to generate -# that wastefully either. -column_index_size_in_kb: 64 - -# Size limit for rows being compacted in memory. Larger rows will spill -# over to disk and use a slower two-pass compaction process. A message -# will be logged specifying the row key. -in_memory_compaction_limit_in_mb: 64 - -# Number of simultaneous compactions to allow, NOT including -# validation "compactions" for anti-entropy repair. Simultaneous -# compactions can help preserve read performance in a mixed read/write -# workload, by mitigating the tendency of small sstables to accumulate -# during a single long running compactions. The default is usually -# fine and if you experience problems with compaction running too -# slowly or too fast, you should look at -# compaction_throughput_mb_per_sec first. -# -# concurrent_compactors defaults to the number of cores. -# Uncomment to make compaction mono-threaded, the pre-0.8 default. -#concurrent_compactors: 1 - -# Multi-threaded compaction. When enabled, each compaction will use -# up to one thread per core, plus one thread per sstable being merged. -# This is usually only useful for SSD-based hardware: otherwise, -# your concern is usually to get compaction to do LESS i/o (see: -# compaction_throughput_mb_per_sec), not more. -multithreaded_compaction: false - -# Throttles compaction to the given total throughput across the entire -# system. The faster you insert data, the faster you need to compact in -# order to keep the sstable count down, but in general, setting this to -# 16 to 32 times the rate you are inserting data is more than sufficient. -# Setting this to 0 disables throttling. Note that this account for all types -# of compaction, including validation compaction. -compaction_throughput_mb_per_sec: 16 - -# Track cached row keys during compaction, and re-cache their new -# positions in the compacted sstable. Disable if you use really large -# key caches. -compaction_preheat_key_cache: true - -# Throttles all outbound streaming file transfers on this node to the -# given total throughput in Mbps. This is necessary because Cassandra does -# mostly sequential IO when streaming data during bootstrap or repair, which -# can lead to saturating the network connection and degrading rpc performance. -# When unset, the default is 200 Mbps or 25 MB/s. -# stream_throughput_outbound_megabits_per_sec: 200 - -# How long the coordinator should wait for read operations to complete -read_request_timeout_in_ms: 5000 -# How long the coordinator should wait for seq or index scans to complete -range_request_timeout_in_ms: 10000 -# How long the coordinator should wait for writes to complete -write_request_timeout_in_ms: 2000 -# How long a coordinator should continue to retry a CAS operation -# that contends with other proposals for the same row -cas_contention_timeout_in_ms: 1000 -# How long the coordinator should wait for truncates to complete -# (This can be much longer, because unless auto_snapshot is disabled -# we need to flush first so we can snapshot before removing the data.) -truncate_request_timeout_in_ms: 60000 -# The default timeout for other, miscellaneous operations -request_timeout_in_ms: 10000 - -# Enable operation timeout information exchange between nodes to accurately -# measure request timeouts. If disabled, replicas will assume that requests -# were forwarded to them instantly by the coordinator, which means that -# under overload conditions we will waste that much extra time processing -# already-timed-out requests. -# -# Warning: before enabling this property make sure to ntp is installed -# and the times are synchronized between the nodes. -cross_node_timeout: false - -# Enable socket timeout for streaming operation. -# When a timeout occurs during streaming, streaming is retried from the start -# of the current file. This _can_ involve re-streaming an important amount of -# data, so you should avoid setting the value too low. -# Default value is 0, which never timeout streams. -# streaming_socket_timeout_in_ms: 0 - -# phi value that must be reached for a host to be marked down. -# most users should never need to adjust this. -# phi_convict_threshold: 8 - -# endpoint_snitch -- Set this to a class that implements -# IEndpointSnitch. The snitch has two functions: -# - it teaches Cassandra enough about your network topology to route -# requests efficiently -# - it allows Cassandra to spread replicas around your cluster to avoid -# correlated failures. It does this by grouping machines into -# "datacenters" and "racks." Cassandra will do its best not to have -# more than one replica on the same "rack" (which may not actually -# be a physical location) -# -# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER, -# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS -# ARE PLACED. -# -# Out of the box, Cassandra provides -# - SimpleSnitch: -# Treats Strategy order as proximity. This improves cache locality -# when disabling read repair, which can further improve throughput. -# Only appropriate for single-datacenter deployments. -# - PropertyFileSnitch: -# Proximity is determined by rack and data center, which are -# explicitly configured in cassandra-topology.properties. -# - GossipingPropertyFileSnitch -# The rack and datacenter for the local node are defined in -# cassandra-rackdc.properties and propagated to other nodes via gossip. If -# cassandra-topology.properties exists, it is used as a fallback, allowing -# migration from the PropertyFileSnitch. -# - RackInferringSnitch: -# Proximity is determined by rack and data center, which are -# assumed to correspond to the 3rd and 2nd octet of each node's -# IP address, respectively. Unless this happens to match your -# deployment conventions (as it did Facebook's), this is best used -# as an example of writing a custom Snitch class. -# - Ec2Snitch: -# Appropriate for EC2 deployments in a single Region. Loads Region -# and Availability Zone information from the EC2 API. The Region is -# treated as the datacenter, and the Availability Zone as the rack. -# Only private IPs are used, so this will not work across multiple -# Regions. -# - Ec2MultiRegionSnitch: -# Uses public IPs as broadcast_address to allow cross-region -# connectivity. (Thus, you should set seed addresses to the public -# IP as well.) You will need to open the storage_port or -# ssl_storage_port on the public IP firewall. (For intra-Region -# traffic, Cassandra will switch to the private IP after -# establishing a connection.) -# -# You can use a custom Snitch by setting this to the full class name -# of the snitch, which will be assumed to be on your classpath. -endpoint_snitch: SimpleSnitch - -# controls how often to perform the more expensive part of host score -# calculation -dynamic_snitch_update_interval_in_ms: 100 -# controls how often to reset all host scores, allowing a bad host to -# possibly recover -dynamic_snitch_reset_interval_in_ms: 600000 -# if set greater than zero and read_repair_chance is < 1.0, this will allow -# 'pinning' of replicas to hosts in order to increase cache capacity. -# The badness threshold will control how much worse the pinned host has to be -# before the dynamic snitch will prefer other replicas over it. This is -# expressed as a double which represents a percentage. Thus, a value of -# 0.2 means Cassandra would continue to prefer the static snitch values -# until the pinned host was 20% worse than the fastest. -dynamic_snitch_badness_threshold: 0.1 - -# request_scheduler -- Set this to a class that implements -# RequestScheduler, which will schedule incoming client requests -# according to the specific policy. This is useful for multi-tenancy -# with a single Cassandra cluster. -# NOTE: This is specifically for requests from the client and does -# not affect inter node communication. -# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place -# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of -# client requests to a node with a separate queue for each -# request_scheduler_id. The scheduler is further customized by -# request_scheduler_options as described below. -request_scheduler: org.apache.cassandra.scheduler.NoScheduler - -# Scheduler Options vary based on the type of scheduler -# NoScheduler - Has no options -# RoundRobin -# - throttle_limit -- The throttle_limit is the number of in-flight -# requests per client. Requests beyond -# that limit are queued up until -# running requests can complete. -# The value of 80 here is twice the number of -# concurrent_reads + concurrent_writes. -# - default_weight -- default_weight is optional and allows for -# overriding the default which is 1. -# - weights -- Weights are optional and will default to 1 or the -# overridden default_weight. The weight translates into how -# many requests are handled during each turn of the -# RoundRobin, based on the scheduler id. -# -# request_scheduler_options: -# throttle_limit: 80 -# default_weight: 5 -# weights: -# Keyspace1: 1 -# Keyspace2: 5 - -# request_scheduler_id -- An identifier based on which to perform -# the request scheduling. Currently the only valid option is keyspace. -# request_scheduler_id: keyspace - -# Enable or disable inter-node encryption -# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that -# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher -# suite for authentication, key exchange and encryption of the actual data transfers. -# NOTE: No custom encryption options are enabled at the moment -# The available internode options are : all, none, dc, rack -# -# If set to dc cassandra will encrypt the traffic between the DCs -# If set to rack cassandra will encrypt the traffic between the racks -# -# The passwords used in these options must match the passwords used when generating -# the keystore and truststore. For instructions on generating these files, see: -# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore -# -server_encryption_options: - internode_encryption: none - keystore: conf/.keystore - keystore_password: cassandra - truststore: conf/.truststore - truststore_password: cassandra - # More advanced defaults below: - # protocol: TLS - # algorithm: SunX509 - # store_type: JKS - # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA] - # require_client_auth: false - -# enable or disable client/server encryption. -client_encryption_options: - enabled: false - keystore: conf/.keystore - keystore_password: cassandra - # require_client_auth: false - # Set trustore and truststore_password if require_client_auth is true - # truststore: conf/.truststore - # truststore_password: cassandra - # More advanced defaults below: - # protocol: TLS - # algorithm: SunX509 - # store_type: JKS - # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA] - -# internode_compression controls whether traffic between nodes is -# compressed. -# can be: all - all traffic is compressed -# dc - traffic between different datacenters is compressed -# none - nothing is compressed. -internode_compression: all - -# Enable or disable tcp_nodelay for inter-dc communication. -# Disabling it will result in larger (but fewer) network packets being sent, -# reducing overhead from the TCP protocol itself, at the cost of increasing -# latency if you block for cross-datacenter responses. -inter_dc_tcp_nodelay: false - -# Enable or disable kernel page cache preheating from contents of the key cache after compaction. -# When enabled it would preheat only first "page" (4KB) of each row to optimize -# for sequential access. Note: This could be harmful for fat rows, see CASSANDRA-4937 -# for further details on that topic. -preheat_kernel_page_cache: false diff --git a/attic/get-and-start-cassandra b/attic/get-and-start-cassandra deleted file mode 100755 index 2c045e19e..000000000 --- a/attic/get-and-start-cassandra +++ /dev/null @@ -1,23 +0,0 @@ -CASSANDRA_DIST=.cassandra/dist -mkdir -p $CASSANDRA_DIST - -curl -sL http://downloads.datastax.com/community/dsc.tar.gz > $CASSANDRA_DIST/dist.tgz -tar -xzf $CASSANDRA_DIST/dist.tgz -C $CASSANDRA_DIST - -CASSANDRA_HOME=`find $CASSANDRA_DIST -name 'dsc-cassandra-*' -print` -if [ -z "$CASSANDRA_HOME" ]; then - echo "Couldn't determine CASSANDRA_HOME" - exit 1 -fi -echo "CASSANDRA_HOME is $CASSANDRA_HOME" - -# these directories must match what's in test-support/cassandra/conf/cassandra.yaml -mkdir -p .cassandra/var/lib/cassandra -mkdir -p .cassandra/var/log/cassandra - -mv $CASSANDRA_HOME/conf/cassandra.yaml $CASSANDRA_HOME/conf/cassandra.yaml.original -cp test-support/cassandra/conf/cassandra.yaml $CASSANDRA_HOME/conf/cassandra.yaml - -$CASSANDRA_HOME/bin/cassandra -p $CASSANDRA_HOME/cassandra.pid - -sleep 5 diff --git a/attic/gradle/build.gradle b/attic/gradle/build.gradle deleted file mode 100644 index b2419f178..000000000 --- a/attic/gradle/build.gradle +++ /dev/null @@ -1,231 +0,0 @@ -buildscript { - repositories { - maven { url 'http://repo.springsource.org/plugins-release' } - } - dependencies { - classpath 'org.springframework.build.gradle:bundlor-plugin:0.1.2' - classpath 'org.springframework.build.gradle:docbook-reference-plugin:0.1.5' - } -} - -description = 'Spring Data Cassandra' -group = 'org.springframework.data' - -repositories { - maven { url "http://repo1.maven.org/maven2" } - maven { url "http://repo.springsource.org/libs-snapshot" } - maven { url "http://repo.springsource.org/plugins-release" } - maven { url "repo" } -} - -apply plugin: "java" -apply plugin: 'eclipse' -apply plugin: 'idea' -apply from: "$rootDir/maven.gradle" -apply plugin: 'docbook-reference' -apply plugin: 'bundlor' - -[compileJava, compileTestJava]*.options*.compilerArgs = ["-Xlint:-serial"] - -// Common dependencies -dependencies { - // Logging - compile "org.slf4j:slf4j-api:$slf4jVersion" - compile "org.slf4j:jcl-over-slf4j:$slf4jVersion" - testRuntime "log4j:log4j:$log4jVersion" - testRuntime "org.slf4j:slf4j-log4j12:$slf4jVersion" - - // Spring Framework - compile("org.springframework:spring-core:$springVersion") { - exclude module: "commons-logging" - } - compile "org.springframework:spring-context-support:$springVersion" - compile "org.springframework:spring-tx:$springVersion" - compile("org.springframework:spring-oxm:$springVersion", optional) - compile "org.springframework.data:spring-data-commons:$springDataVersion" - - // Cassandra Drivers - compile "com.datastax.cassandra:cassandra-driver-core:$datastaxVersion" - compile "org.apache.cassandra:cassandra-all:$cassandraVersion" - compile "io.netty:netty:$nettyVersion" - - // Mappers - compile("org.codehaus.jackson:jackson-mapper-asl:$jacksonVersion", optional) - compile("commons-beanutils:commons-beanutils-core:1.8.3", optional) - - // Testing - testCompile "junit:junit:$junitVersion" - testCompile "org.springframework:spring-test:$springVersion" - testCompile "org.mockito:mockito-all:$mockitoVersion" - testCompile("javax.annotation:jsr250-api:1.0", optional) - testCompile("com.thoughtworks.xstream:xstream:1.3", optional) - testCompile "org.cassandraunit:cassandra-unit:$cassandraUnitVersion" - testCompile "org.cassandraunit:cassandra-unit-spring:$cassandraUnitVersion" - testCompile "cglib:cglib-nodep:$cglibVersion" - -} - -sourceCompatibility = 1.6 -targetCompatibility = 1.6 - -javadoc { - ext.srcDir = file("${projectDir}/src/main/doc") - ext.destinationDir = file("${buildDir}/docs/javadoc") - ext.tmpDir = file("${buildDir}/api-work") - - configure(options) { - stylesheetFile = file("${srcDir}/spring-javadoc.css") - //overview = "${srcDir}/overview.html" - docFilesSubDirs = true - - outputLevel = org.gradle.external.javadoc.JavadocOutputLevel.QUIET - breakIterator = true - showFromProtected() - groups = [ - 'Spring Cassandra' : ['org.springframework.cassandra*'], - 'Spring Data Cassandra' : ['org.springframework.data.cassandra*'], - ] - - links = [ - "http://static.springframework.org/spring/docs/3.0.x/javadoc-api", - "http://download.oracle.com/javase/6/docs/api", - "http://jackson.codehaus.org/1.8.2/javadoc" - ] - - exclude "org/springframework/data/cassandra/config/**" - } - - logger.error("BuildDir => ${buildDir}"); - logger.error("DestDir => ${destinationDir}"); - logger.error("ExtDestDir => ${ext.destinationDir}"); - - copy { - from "src/main/doc/resources" - into "${ext.destinationDir}/resources" - include '**/*' - } - - title = "${rootProject.description} ${version} API" -} - -bundlor { - manifestTemplate = file("${projectDir}/template.mf").text -} - - -jar { - manifest.attributes['Implementation-Title'] = 'spring-data-cassandra' - manifest.attributes['Implementation-Version'] = project.version - - from("$rootDir/docs/src/info") { - include "license.txt" - include "notice.txt" - into "META-INF" - expand(copyright: new Date().format('yyyy'), version: project.version) - } -} - -task sourcesJar(type: Jar, dependsOn:classes) { - classifier = 'sources' - from sourceSets.main.allJava -} - -task javadocJar(type: Jar) { - classifier = 'javadoc' - from javadoc -} - -reference { - sourceDir = file('docs/src/reference/docbook') -} - -task docsZip(type: Zip) { - group = 'Distribution' - classifier = 'docs' - description = "Builds -${classifier} archive containing api and reference for deployment" - - from('docs/src/info') { - include 'changelog.txt' - } - - from (javadoc) { - into 'api' - } - - from (reference) { - into 'reference' - } -} - -task schemaZip(type: Zip) { - group = 'Distribution' - classifier = 'schema' - description = "Builds -${classifier} archive containing all XSDs for deployment" - - def Properties schemas = new Properties(); - - sourceSets.main.resources.find { - it.path.endsWith('META-INF' + File.separator + 'spring.schemas') - }?.withInputStream { schemas.load(it) } - - for (def key : schemas.keySet()) { - def shortName = key.replaceAll(/http.*schema.(.*).spring-.*/, '$1') - def alias = key.replaceAll(/http.*schema.(.*).(spring-.*)/, '$2') - assert shortName != key - File xsdFile = sourceSets.main.resources.find { - it.path.replace('\\', '/').endsWith(schemas.get(key)) - } - assert xsdFile != null - - into (shortName) { - from xsdFile.path - rename { String fileName -> alias } - } - } -} - -task distZip(type: Zip, dependsOn: [jar, docsZip, schemaZip, sourcesJar, javadocJar]) { - group = 'Distribution' - classifier = 'dist' - description = "Builds -${classifier} archive, containing all jars and docs, " + - "suitable for community download page." - - ext.zipRootDir = "${project.name}-${project.version}" - - into (zipRootDir) { - from('docs/src/info') { - include 'readme.txt' - include 'license.txt' - include 'notice.txt' - expand(copyright: new Date().format('yyyy'), version: project.version) - } - - from(zipTree(docsZip.archivePath)) { - into "docs" - } - - from(zipTree(schemaZip.archivePath)) { - into "schema" - } - into ("dist") { - from rootProject.collect { project -> project.libsDir } - } - } -} - -artifacts { - archives sourcesJar - archives javadocJar - - archives docsZip - archives schemaZip - archives distZip -} - -task wrapper(type: Wrapper) { - description = 'Generates gradlew[.bat] scripts' - gradleVersion = '1.2' -} - -assemble.dependsOn = ['jar', 'sourcesJar'] -defaultTasks 'build' \ No newline at end of file diff --git a/attic/gradle/gradle.properties b/attic/gradle/gradle.properties deleted file mode 100644 index 30c49caf8..000000000 --- a/attic/gradle/gradle.properties +++ /dev/null @@ -1,26 +0,0 @@ -## Dependecies Version - -# Logging -log4jVersion = 1.2.17 -cassandraUnitVersion=1.2.0.1 -cglibVersion=2.2.2 -slf4jVersion = 1.6.6 - -# Common libraries -springVersion = 3.1.4.RELEASE -springDataVersion = 1.5.3.RELEASE -jacksonVersion = 1.8.8 - -# Testing -junitVersion = 4.8.1 -mockitoVersion = 1.8.5 - -# Drivers -datastaxVersion = 1.0.4-dse -cassandraVersion = 1.2.0 -nettyVersion = 3.6.2.Final - -# -------------------- -# Project wide version -# -------------------- -version=1.2.0.BUILD-SNAPSHOT \ No newline at end of file diff --git a/attic/gradle/maven.gradle b/attic/gradle/maven.gradle deleted file mode 100644 index 04182b3ea..000000000 --- a/attic/gradle/maven.gradle +++ /dev/null @@ -1,63 +0,0 @@ -apply plugin: 'maven' - -ext.optionalDeps = [] -ext.providedDeps = [] - -ext.optional = { optionalDeps << it } -ext.provided = { providedDeps << it } - -install { - repositories.mavenInstaller { - customizePom(pom, project) - } -} - -def customizePom(pom, gradleProject) { - pom.whenConfigured { generatedPom -> - // respect 'optional' and 'provided' dependencies - gradleProject.optionalDeps.each { dep -> - generatedPom.dependencies.find { it.artifactId == dep.name }?.optional = true - } - gradleProject.providedDeps.each { dep -> - generatedPom.dependencies.find { it.artifactId == dep.name }?.scope = 'provided' - } - - // eliminate test-scoped dependencies (no need in maven central poms) - generatedPom.dependencies.removeAll { dep -> - dep.scope == 'test' - } - - // add all items necessary for maven central publication - generatedPom.project { - name = gradleProject.description - description = gradleProject.description - url = 'http://github.com/shvid/spring-data-cassandra' - organization { - name = 'Mirantis' - url = 'http://www.mirantis.com/spring-data/cassandra' - } - licenses { - license { - name 'The Apache Software License, Version 2.0' - url 'http://www.apache.org/licenses/LICENSE-2.0.txt' - distribution 'repo' - } - } - scm { - url = 'http://github.com/shvid/spring-data-cassandra' - connection = 'scm:git:git://github.com/shvid/spring-data-cassandra' - developerConnection = 'scm:git:git://github.com/shvid/spring-data-cassandra' - } - developers { - developer { - id = 'shvid' - name = 'Alex Shvid' - email = 'aschwid@mirantis.com' - properties { - twitter = 'alexshvid' - } - } - } - } - } -} \ No newline at end of file diff --git a/attic/gradle/settings.gradle b/attic/gradle/settings.gradle deleted file mode 100644 index 062310fab..000000000 --- a/attic/gradle/settings.gradle +++ /dev/null @@ -1 +0,0 @@ -rootProject.name = 'spring-data-cassandra' \ No newline at end of file diff --git a/etc/springdata.importorder b/etc/springdata.importorder new file mode 100644 index 000000000..a974f58eb --- /dev/null +++ b/etc/springdata.importorder @@ -0,0 +1,8 @@ +#Organize Import Order +#Mon Nov 14 09:58:12 CET 2016 +5=com +4=org +3=javax +2=java +1= +0=\#