Prior to this commit, no exception was raised if a message could not
be converted to the requested payload because no suitable converter
were found.
This commit adds an explicit check if the converted payload is null.
Issue: SPR-11817
Eclipse 4.4 early release versions have issues with generics.
This commit slightly tweaks the use of generics in
JmsMessagingTemplateTests so that the class compiles in the latest
builds of Eclipse 4.4
This commit revisits JmsMessagingTemplate and adds support for
receiving operations as well. JmsMessageSendingOperations has been
renamed to JmsMessageOperations.
The messaging abstraction did not split receiving and request-reply
operations. AbstractMessageReceivingTemplate has been created to hold
only the receiving operations.
Issue: SPR-11772
This commit adds a JMS implementation of MessageSendingOperations,
allowing to send JMS messages using Spring's standard Messaging
abstraction.
MessagingMessageConverter is a standard JMS's MessageConverter that
can convert Spring's Message to JMS message and vice versa. Existing
infrastructure has been updated to use this implementation.
Issue: SPR-11772
This commit avoids throwing JMSException from the listener execution
as this is not allowed per spec. Our SessionAwareMessageListener
gives a callback that can throw JMSException and we have "abused" it
so far.
Typical message processing goes in those 3 steps:
* Unmarshall the javax.jms.Message to the requested type
* Invoke the actual user method (including processing of method
arguments)
* Send a reply message, if any
Those three steps have been harmonized so that they don't throw a
JMSException anymore. For the later case, introduced
ReplyFailureException as a general exception indicating the
reply message could not have been sent.
Issue: SPR-11778
This commit adds an explicit error message when the BackOff instance
has returned BackOffExecution#STOP which basically means that no
further attempts are allowed.
This error message is a convenience way to notify that the container is
about to be shut down.
Issue: SPR-11746
This commit separates the BackOff configuration from an actual
execution. BackOffExecution now contains all the state of a
particular execution and BackOff is only meant to start (i.e.
create) a new execution.
The method "reset" has been removed as its no longer necessary:
when an execution does not need to be used for a given operation
anymore it can be simply discarded.
Issue: SPR-11746
This commit adds a "back-off" attribute to the jms:listener-container
element so that a BackOff instance can be provided for users of the
XML namespace.
Issue: SPR-11746
Prior to this commit, DefaultMessageListenerContainer was recovering
on failure using a fixed time interval, potentially in an infinite way.
This commit adds an extra "backoff" property to the container that
permits to fine tune the recovery interval using a BackOff instance.
FixedBackOff provides a fixed interval between two attempts and a
maximum number of retries. ExponentialBackOff increases an initial
interval until a maximum interval has been reached. A BackOff instance
can return a special "STOP" time value that indicates that no further
attemps should be made. DefaultMessageListenerContainer uses this
value to stop the container.
protected method "sleepInbetweenRecoveryAttempts" has been renamed
to "applyBackOff" and now returns a boolean that indicate if the
back off has been applied and a new attempt should now be made.
Issue: SPR-11746
This commit removes the queue attribute of the JmsListener annotation
as this information should be provided by the container factory and not
by each individual listener endpoints.
There was a side effect that an annotation value cannot be null, which
was forcing the container to be a queue-based container by default.
Issue: SPR-9882
This commit replaces the "responseDestination" attribute on the
JmsListener annotation by a support of the standard SendTo annotation.
Issue: SPR-11707
Prior to this commit, the default JmsListenerContainerFactory to use
must be explicitly set. Since having a single container factory is a
fairly common use case, we look up the default one automatically
using the bean name "jmsListenerContainerFactory".
It is still possible to provide an explicit default but since it refers
more to "the" container factory to use, the parameter has been
renamed to "containerFactory" which is shorter and more explicit.
The lookup strategy is lazy: if all endpoints are providing an
explicit container factory and no container factory with the
"jmsListenerContainerFactory" bean name exists, no exception
will be thrown.
Issue : SPR-11706
Clean up compiler warnings in the tests of spring-jms. This commit
adds type parameters to all the types (mostly `List` and `Map`).
I am not too sure about the `Map` type parameters in
`MessageContentsDelegate` and `ResponsiveMessageDelegate` however the
respective methods seem unused.
This commit adds the support of JMS annotated endpoint. Can be
activated both by @EnableJms or <jms:annotation-driven/> and
detects methods of managed beans annotated with @JmsListener,
either directly or through a meta-annotation.
Containers are created and managed under the cover by a registry
at application startup time. Container creation is delegated to a
JmsListenerContainerFactory that is identified by the containerFactory
attribute of the JmsListener annotation. Containers can be
retrieved from the registry using a custom id that can be specified
directly on the annotation.
A "factory-id" attribute is available on the container element of
the XML namespace. When it is present, the configuration defined at
the namespace level is used to build a JmsListenerContainerFactory
that is exposed with the value of the "factory-id" attribute. This can
be used as a smooth migration path for users having listener containers
defined at the namespace level. It is also possible to migrate all
listeners to annotated endpoints and yet keep the
<jms:listener-container> or <jms:jca-listener-container> element to
share the container configuration.
The configuration can be fine-tuned by implementing the
JmsListenerConfigurer interface which gives access to the registrar
used to register endpoints. This includes a programmatic registration
of endpoints in complement to the declarative approach. A default
JmsListenerContainerFactory can also be specified to be used if no
containerFactory has been set on the annotation.
Annotated methods can have flexible method arguments that are similar
to what @MessageMapping provides. In particular, jms listener endpoint
methods can fully use the messaging abstraction, including convenient
header accessors. It is also possible to inject the raw
javax.jms.Message and the Session for more advanced use cases. The
payload can be injected as long as the conversion service is able to
convert it from the original type of the JMS payload. By
default, a DefaultJmsHandlerMethodFactory is used but it can be
configured further to support additional method arguments or to
customize conversion and validation support.
The return type of an annotated method can also be an instance of
Spring's Message abstraction. Instead of just converting the payload,
such response type allows to communicate standard and custom headers.
The JmsHeaderMapper infrastructure from Spring integration has also
been migrated to the Spring framework. SimpleJmsHeaderMapper is based
on SI's DefaultJmsHeaderMapper. The simple implementation maps all
JMS headers so that the generated Message abstraction has all the
information stored in the protocol specific message.
Issue: SPR-9882
Prior to this commit, the codebase was using a mix of log4j.xml
and log4j.properties for test-related logging configuration. This
can be an issue as log4j takes the xml variant first when looking
for a default bootstrap configuration.
In practice, some modules declaring the properties variant were
taking the xml variant configuration from another module.
The general structure of the configuration has also been
harmonized to provide a standard console output as well as an
easy way to enable trace logs for the current module.
Fix a variety of typos throughout the project, primarily in
comments (javadoc or otherwise) but also in a handful of log messages
and a couple exception messages.
ISSUE: SPR-11123
Fix remaining Java compiler warnings, mainly around missing
generics or deprecated code.
Also add the `-Werror` compiler option to ensure that any future
warnings will fail the build.
Issue: SPR-11064
This fine-tuned change restores the original Spring 3.0 behavior for Oracle AQ, and also allows for other ConnectionFactory types to comply with the "getDataSource()" pattern.
Issue: SPR-10829
Also fixing an old XmlBeanFactory test that relies on "ref local" which is gone in the 4.0 xsd now, redeclaring the affected file to an older xsd version.
Removed spring-beans.dtd (the 1.x variant) and spring-oxm-1.5.xsd (pre-Spring-Framework variant), in order to raise the backwards compatibility limit a little bit at least. We'll keep supporting the 2.0 and 2.5 xsd versions for the time being, as well as spring-beans-2.0.dtd.
Removed the ref 'local' attribute in spring-beans-4.0.xsd since 'local' lost its differentiating role to a regular bean ref back in the 3.1 days when we started allowing for the same bean id to reappear in a different beans section of the same configuration file (with a different profile).
Issue: SPR-10437
Known limitations:
* Spring's SingleConnectionFactory and CachingConnectionFactory do not support createContext calls for JMSContext creation at this point. Note that the JMSContext model bypasses the point of a Connection/Session pool anyway; this will only really work with a native JMS 2.0 ConnectionFactory and provider-specific pooling such as in an EE environment.
* JmsTemplate has no out-of-the-box support for send calls with an async completion listener. Note that a CompletionListener can be specified in a custom ProducerCallback implementation if really necessary.
There is no special support for the simplified JMSContext API, and likely never will be: JMSContext can be used from a native ConnectionFactory directly. @Inject JMSContext isn't supported due to rather involved rules for defining and scoping the injected context which are quite at odds with the Spring way of doing these things. We strongly recommend JmsTemplate instead, or @Resource ConnectionFactory with a createContext call within a Java 7 try-with-resources clause (as shown in the specification). After all, JMSContext has primarily been designed with EE's one-session-per-connection model and JTA transactions in mind, not with Spring-style use of a native JMS provider and native JMS transactions.
Issue: SPR-8197
* 3.2.x: (28 commits)
Hide 'doc' changes from jdiff reports
Document @Bean 'lite' mode vs @Configuration
Final preparations for 3.2.2
Remove Tiles 3 configuration method
Polishing
Extracted buildRequestAttributes template method from FrameworkServlet
Added "beforeExistingAdvisors" flag to AbstractAdvisingBeanPostProcessor
Minor refinements along the way of researching static CGLIB callbacks
Compare Kind references before checking log levels
Polish Javadoc in RequestAttributes
Fix copy-n-paste errors in NativeWebRequest
Fix issue with restoring included attributes
Add additional test for daylight savings glitch
Document context hierarchy support in the TCF
Fix test for daylight savings glitch
Make the methodParameter field of HandlerMethod final
Disable AsyncTests in spring-test-mvc
Reformat the testing chapter
Document context hierarchy support in the TCF
Document context hierarchy support in the TCF
...
