JIRA: https://jira.spring.io/browse/INT-3524
Backport to 4.0 schemas.
A number of references (expected-type) still referred to
the Spring Integration 3.0 MessageChanel.
JIRA: https://jira.spring.io/browse/INT-3473
A simple fix to prevent `Selector closed` error loging message on `TcpNioServerConnectionFactory#stop()`
Polishing
Fixed hung assembler described in INT-3453.
Used CountDownLatch instead of sleep()
INT-3453 Add Test Case
Currently failing for me - assembler thread stuck on CDL.
Remove redundant `if (TcpNioConnection.this.writingLatch != null)` from `ChannelInputStream#write`
JIRA: https://jira.spring.io/browse/INT-3433`
If a read fails due to insufficient threads, delay the read
for (default 100ms) - do not re-enable OP_READ until that
time has elapsed. Avoids spinning the CPU.
INT-3433 More Polishing
If the assembler couldn't execute a new assembler after assembling
the current message (when it detected there is more data), in the
finally block it would "continue" only if the socket was still
open.
The test case closes the socket after sending 4 messages so when
this condition occurred, the assembler failed to continue and
data was left in the buffer.
Remove the `isOpen()` check in the finally block and always continue
if there's not another assembler running and there's data available.
INT-3433 More Polishing
We can still get starvation if the selector is in a long
wait (in select()) when a read is delayed.
Whenever a read is delayed, wake the selector so its next
select will use the readDelay timeout.
INT-3433 Reference Docs
Also remove Thread.yield().
Revert redundant boolean return from `TcpNioConnection#checkForAssembler()`
JIRA: https://jira.spring.io/browse/INT-3410
When running a fixed thread pool with a bound queue,
and CALLER_RUNS execution rejection policy, it
was possible to deadlock the IO selector thread.
Add a `CompositeExecutor` to use different threads for
IO to those used for message assembly.
Add a `CallerBlocksPolicy` to block the invoking thread
(for a specified time) if the pool is exhausted.
Add documentation.
Polishing
JIRA: https://jira.spring.io/browse/INT-1956
Emit an application event when a decoding exception
occurs, allowing the user to examine the buffer
at the time the exception occurred.
INT-1956: Polishing
Polishing
Use `OP_READ` instead of `readyOps()` when removing interest.
Polishing - Fix ConnectionTimeoutTests
Test publisher was casting all events to TcpConnectionEvent.
JIRA: https://jira.spring.io/browse/INT-3374
Move `getMessageBuilderFactory` from `IntegrationContexUtils`
to `IntegrationUtils`.
Change DOS Newlines to Unix
`AbstractMessageGroupStore`.
JIRA: https://jira.spring.io/browse/INT-2738
Add a `getComponentType()` method for all handlers,
message producers, and message sources that implement
`NamedComponent` (see `SPCA.getComponentType()`).
Add rome as an optional dependency - STS complained
because AtomFeedHttpMessageConverter has a dependency
on it.
JIRA: https://jira.spring.io/browse/INT-3349
Several FactoryBeans did not propagate the BeanFactory
to their created object(s). Beans that create messages
must have access to a bean factory to get the
message builder factory.
Fix the FactoryBeans and add a mock FB to all tests that
need one.
Add a runtime environment variable to make any infractions
fatal. This should be set to `true` on CI builds and on
framework developer environments.
JIRA: https://jira.spring.io/browse/INT-3319
The `MessageBuilderFactory` abstraction relies on the bean factory
being propagated to all classes that create messages.
Some classes were missed in the initial PR.
JIRA: https://jira.spring.io/browse/INT-3041
Add namespace support to simplify configuration of
a `RequestHandlerRetryAdvice.
INT-3041 Polishing; PR Comments
* Allow a retry-advice element within the request-handler-advice-chain
* Clean up schema (should not have allowed `synchronization-factory` on
the request-handler-advice-chain.
INT-3041 Polishing; PR Comment
This is still a work in process.
There are a bunch of TODOs in classes
that are not managed by Spring and so
need to have the MessageBuilderFactory
injected.
But I am looking for feedback on the
approach.
INT-3309 Resolve TODOs
Provide access to the MessageBuilderFactory in all classes.
INT-3309 Polishing + Tests
* Fallback to 'fromMessage()' if mutating and inbound message is not MutableMessage
* Add 'alwaysMutate' boolean to MutableMessageBuilderFactory - coerces 'fromMessage' calls to 'mutateMessage'
* Add tests
INT-3309 Polishing; PR Comments
Also add tests to parent/child contexts where the parent has the
default message builder and the child has a mutable message builder.
INT-3309 More Polish; PR Comments
Also fix removeHeader in MMB.
ByteArraySingleTerminatorSerializer does not support multiple
subsequent terminators (zero length messages).
JIRA: https://jira.springsource.org/browse/INT-3290
* Add unit test to verify bug.
* Fix bug.
Polishing:
* Remove test for `n >= 0`; n cannot be < 0 here
* Move test case to `DeserializationTests`
JIRA: https://jira.springsource.org/browse/INT-3130
* add `result-type` attribute to the `<object-to-json-transformer>`
based on enumeration values: `STRING`, `NODE`
* Provide implementations for methods to convert value to the node representation
* Refactoring according new generic option in the `JsonObjectMapper`
* Add tests and documentation
Need Migration Guide note according this refactoring
INT-3130: remove some deprecation and JavaDocs
Addressed PR comments
Doc Polishing
When `MHE` was moved to spring-messaging, 2 constructors were
dropped. INT-3246 worked around it but it had undesirable
side-effects. Constructors have been added back in
spring-messaging so this commit reverts to using those
constructors.
JIRA: https://jira.springsource.org/browse/INT-3271
- Rename EiMessageHeaderAccessor to IntegrationMessageHeaderAccessor
- Remove GenericMessage
- Minor TODOs
- Start a new What's new" chapter in the reference
JIRA: https://jira.springsource.org/browse/INT-3242
JIRA: https://jira.springsource.org/browse/INT-3233
With Windows 7 and Java 7/8 closing a server channel does
not close the underlying socket. Closing the Selector does
close the socket.
It is not clear why this is needed, given that a selector can
be used for multiple sockets.
However, we only use the server side selector for a single
server socket so there is no detriment in closing it.
Also close the selector on the client side (even though it is
used for multiple sockets, because we are stopping the factory
anyway and all sockets will be closed).
However, closing the selector opens us up to 'ClosedSelectorException's
in several places. Add catch blocks to deal with this exception, and only
log an error if the factory is active.
While debugging this issue, I found that a number of (older) tests
left threads running, sockets open etc.
INT-3233 Polishing - PR Comments
Use `Arrays.asList()` instead of `Collections.arrayToList()` in
places where a generic type needs to be supplied by the caller.
This maintains compile-time compatibility with both Spring 3 and 4,
where Spring 4 added the generic type to the utility class.
The four occurrences where this was needed are not impacted
by the fact that `Arrays.asList()` returns an unmodifiable list.
JIRA: https://jira.springsource.org/browse/INT-3212
INT-3212 Fix Failing TCP Test
TcpNioConnections can deadlock when a fixed thread pool is being used.
The deadlock is detected after 60 seconds, but the test case failed
after 20 seconds - before the deadlock was detected.
Change the test to use a cached thread pool instead.
Also, increase concurrency by using threading in the test server
so each socket is handled on a separate thread.
Enchance connectionId to include both local and remote ports to
aid debugging.
Some minor formatting corrections.
Intercepted TCP connections did not publish events.
TcpReceivingChannelAdapterTests did not close server factories after
tests.
Suppress 'no publisher' log messages.
Previously, the TcpConnectionOpenEvent was published as soon
as the socket was connected, but the TcpConnection was not yet
ready for use.
Defer publishing the event until the connection is fully
initialized and registered with the factory and thus available
for use.
Update the test cases to reflect this behavior.
Since the event is now published by the appropriate concrete
factory implementations, enhance the ConnectionToConnectionTests
to verify proper eventing with both Net and NIO implementations.
INT-3178: Add `theConnection` `ReadWriteLock`
INT-3178 Polishing
- Refactor obtainConnection() into obtainSharedConnection() and obtainNewConnection() for Net and NIO Client factories.
- obtainConnection is now common for these two factories, and overridden by the caching and failover factories.
- ReadWriteLock - double check for shared connection after lock obtained.
INT-3178: Polishing
This commit updates Spring Integration to depend upon Spring 4, making
use of the message types that have moved from Spring Integration into
Spring's new spring-messaging module.
The default message converter no longer supports conversion of a
message that is null, throwing an IllegalArgumentException if an
attempt is made to convert null. Furthermore, GenericMessagingTemplate
does not support sending null, again throwing an
IllegalArgumentException. Previously, MessagingTemplate had no-oped an
attempt to send null.
ConcurrentAggregatorTests and AggregatorTests both had a single test
that was specifically testing the behaviour of an aggregator that
returns null for its message. These tests have been removed.
CorrelatingMessageHandlerTests have been updated to specify some
additional behaviour for its mocks so that null messages are not
returned.
These are the only functional changes that have been made. All other
changes are simply for moving to the repackaged and/or renamed types.
In the move to being part of core Spring, a number of constants and
header accessor methods have moved from MessageHeaders to
MessageHeaderAccessor. This commit continues this pattern for
the enterprise integration headers that are specific to Spring
Integration. A new class, EiMessageHeaderAccessor, has been created.
This class provides constants and methods for working with SI-specific
headers. The main code and tests have been updated to use this new
class.
Previously, when an exception occurred on a send, the
connection was not forcibly closed. When using a
CachingClientConnectionFactory, this prevented the connection
(albeit stale) from being returned to the cache.
Perform a forced (physical) close whenever a send fails.
Add test cases for both Net and NIO implementations, using
a CCCF, to verify the connection is returned to the pool so
the closed state can be detected on the next retrieval, causing
a refresh.
Also, change the synchronization in the NIO send to
synchronize on the socketChannel, not the mapper (which is
shared).
JIRA: https://jira.springsource.org/browse/INT-3163
Add a `@Rule` to skip long-runing tests during normal builds.
Add the rule to long-running tests in gemfire, ip, jms, jmx.
Add an environment variable `RUN_LONG_INTEGRATION_TESTS`; when set
to true, all tests are run.
Set the environment variable to true on all nightly builds.
Build now runs in 13 minutes on my 3 year old laptop.
* Add <spel-property-accessors> to configure a list of beans
that implement `org.springframework.expression.PropertyAccessor`
* Add `SpelPropertyAccessorRegistrar` to manage a list of PropertyAccessors
for Integration infrastructure
* Refactoring for `SpelFunctionRegistrar` and `IntegrationEvaluationContextFactoryBean`
to fix the issue when there is no `SpelFunctionRegistrar`(`SpelPropertyAccessorRegistrar`)
in the child AC, but there is one in the parent.
Previously the inheritance did't work for that reason.
* Now parent/child logic moved to `IntegrationEvaluationContextFactoryBean`
* Add documentation
JIRA: https://jira.springsource.org/browse/INT-3133
INT-3133: Rebasing, polishing and documentation
INT-3133: PropertyAccessors override support
* `@Ignore` `SOLingerTests#finReceivedNioLinger()` test
INT-3133: Change JavaDoc link to 3.0.0.RC1
Polishing
- Remove duplicate check - last bean def wins
- Doc Polishing
https://jira.springsource.org/browse/INT-3146
Incompatibility of using socket timeouts with a caching client
connection factory.
When a socket option timeout (soTimeout) is set on a TCP connection
and the timeout occurs, the socket is closed.
When a connection is intercepted, the close is performed through
the interceptor (for example to allow a closing handshake before the
physical close).
However, the caching client connection factory is implemented
using an interceptor, which returns the underlying connection to
the cache pool (for reuse). In the case of a TcpNetConnection,
the reader thread has terminated meaning that, the next time the connection
is used, no reply will ever be received.
The work-around (when using a gateway) is to use the 'remote-timeout'
attribute instead of relying on the soTimeout. There is no
work around when using collaborating channel adapters with a Net
connection. Using NIO works because there is no reader thread
in that case, but the socket is never closed on a timeout.
Always physically close the connection whenever an exception occurs
even if the close was delegated to an interceptor.
Add test cases for Net and NIO implementations.
* Add XSD attributeGroup `smartLifeCycleAttributeGroup`
* Use it for all adapters tags
* Refactoring `AbstractChannelAdapterParser` hierarchy
* Refactoring some `MessageHandler`'s that should not have `autoStartup` & `phase`.
It is the responsibility of `AbstrctEndpoint`
* Polishing some tests according new logic
JIRA: https://jira.springsource.org/browse/INT-2998
INT-2998: Polishing
Polishing
- Reformat schemas where indentation changed
- Add SLC to the UDP inbound adapter
Polishing tests to follow with new changes in the SPR 4.0
Polishing build.gradle to be compatible with SPR 4.0
Build passes with SPR 3.2.4 too
JIRA: https://jira.springsource.org/browse/INT-3131
