When `MHE` was moved to spring-messaging, 2 constructors were
dropped. INT-3246 worked around it but it had undesirable
side-effects. Constructors have been added back in
spring-messaging so this commit reverts to using those
constructors.
JIRA: https://jira.springsource.org/browse/INT-3271
- Rename EiMessageHeaderAccessor to IntegrationMessageHeaderAccessor
- Remove GenericMessage
- Minor TODOs
- Start a new What's new" chapter in the reference
JIRA: https://jira.springsource.org/browse/INT-3242
JIRA: https://jira.springsource.org/browse/INT-3006
* Add integration properties `channels.maxUnicastSubscribers` and `channels.maxBroadcastSubscribers`
with default value to `Integer.MAX_VALUE`
* Add SpEL value resolution for those default values from parsers
* Deprecate similar properties from `ChannelInitializer`
INT-3006 `maxSubscribers` from channels' onInit()
* Move default init for `maxSubscribers` to the channels' `onInit()`
from `integrationProperties`, not from parsers
* extract `default` `integrationProperties` from static block in the `IntegrationProperties`
and use them as `default` on `IntegrationContextUtils#getIntegrationProperties`
* Add bean definition expression building to get the default values for `integration properties`
on bean building phase.
INT-3006: Add `taskScheduler.poolSize` property
INT-3006: Polishing
Allows reply channel resolution after a message has been serialized
somewhere in a flow. Previously, the reply channel was lost.
With this change, the reply channel can be registered and the header
becomes a string (channel name) that can be serialized.
JIRA: https://jira.springsource.org/browse/INT-2269
INT-2269 Rename Registry to HeaderChannelRegistry
- Extract interface
- DefaultHeaderChannelRgistry
INT-2269 Polishing; PR Comments
- Add errorChannel registration as well.
INT-2269 HeaderChannelRegistry - Fix
The internal BridgeHandler in MessagingGatewaySupport did not have
a channel resolver. When a reply was explicitly routed to the gateway's
reply channel, the String representation of the reply channel could
not be resolved to a channel.
Set the BeanFactory on the bridge handler.
Add tests.
INT-2269 HeaderChannelRegistry - Fix JMS/Enricher
The JMS inbound gateway and ContentEnricher instantiate a
MessagingGatewaySupport internally it does not get a
reference to the BeanFactory. This means that the internal
BridgeHandler cannot resolve the String representation of
the reply channel to a channel.
Make ChannelPublishingJmsMessageListener BeanFactory aware, and
propagate the bean factory to the MGS.
Set the MGS bean factory in the ContentEnricher (which is already
BFA).
INT-2269: Polishing
Convenience for configuring a custom listener container - avoids
having to transfer many attributes from the adapter to the
bean when switching to a custom implementation.
JIRA: https://jira.springsource.org/browse/INT-2421
INT-2421 Polishing - PR Comments
Also auto-create adapter channel if necessary.
JIRA: https://jira.springsource.org/browse/INT-3017
* Add parsers tests and integration tests
* Polishing Redis XSD
* Fix `JmsMessageDrivenEndpointParser` `LifeCycle` attributes
* Catch `RedisSystemException` after `this.boundListOperations.rightPop`.
It maybe an exception about 'connection closed'.
If the `RedisQueueMessageDrivenEndpoint` is 'active' this exception is rethrown,
otherwise just logged under error category.
* Add Redis queue components docs
JIRA: https://jira.springsource.org/browse/INT-3019
INT-3017 Doc Polishing
Previously, `MetadataStore` couldn't be configured for Twitter Adapters
- only a global one could be used.
The `metadataKey` was generated automatically with a 'difficult' value.
* Register all `MessageSource` for `SourcePollingChannelAdapter`
as beans with id based on adapter id and prefix '.source' (INT-3147)
* Polishing parser to get rid of explicit `MessageSource` beans. (INT-3147)
* Make Feed and Twitter adapters `id` attribute as required -
now it presents a `metadataKey` for `MetadataStore` (INT-3147)
* Add to Twitter adapters a reference attribute for `MetadataStore` (INT-3173)
* Add Twitter adapters `poll-skip-period` attribute (INT-3167)
* Add and implement `MetadataStore#remove` (INT-1941)
* Make `MetadataStore` as `@ManagedResource` (INT-1941)
* Polishing tests
JIRAs:
https://jira.springsource.org/browse/INT-3147https://jira.springsource.org/browse/INT-3167https://jira.springsource.org/browse/INT-3173https://jira.springsource.org/browse/INT-1941
INT-3147: Polishing and fixes
* add domain suffix to `metadataKey`
* change contract of `MetadataStore.remove`
* remove timeout window from `AbstractTwitterMessageSource`
* polishing and fix `SearchReceivingMessageSourceWithRedisTests`
INT-3147: Rebasing and polishing
INT-3147: fix 'metadata' package tangle
INT-3147 Doc Polishing
https://jira.springsource.org/browse/INT-2961
onInit() relied on subclasses calling super.onInit() to apply the
advice chain and add the BeanFactory to the MessagingTemplate.
At least one extension (smpp) failed to do this, disabling these features.
Make onInit() final and call doInit() for subclass initialization (no-op in ARPMH).
INT-2961 Polishing
- do not increase visibility of doInit in subclasses.
- remove final modifiers from doInit so user subclasses can participate in initialization if needed.
This commit updates Spring Integration to depend upon Spring 4, making
use of the message types that have moved from Spring Integration into
Spring's new spring-messaging module.
The default message converter no longer supports conversion of a
message that is null, throwing an IllegalArgumentException if an
attempt is made to convert null. Furthermore, GenericMessagingTemplate
does not support sending null, again throwing an
IllegalArgumentException. Previously, MessagingTemplate had no-oped an
attempt to send null.
ConcurrentAggregatorTests and AggregatorTests both had a single test
that was specifically testing the behaviour of an aggregator that
returns null for its message. These tests have been removed.
CorrelatingMessageHandlerTests have been updated to specify some
additional behaviour for its mocks so that null messages are not
returned.
These are the only functional changes that have been made. All other
changes are simply for moving to the repackaged and/or renamed types.
In the move to being part of core Spring, a number of constants and
header accessor methods have moved from MessageHeaders to
MessageHeaderAccessor. This commit continues this pattern for
the enterprise integration headers that are specific to Spring
Integration. A new class, EiMessageHeaderAccessor, has been created.
This class provides constants and methods for working with SI-specific
headers. The main code and tests have been updated to use this new
class.
Add a `@Rule` to skip long-runing tests during normal builds.
Add the rule to long-running tests in gemfire, ip, jms, jmx.
Add an environment variable `RUN_LONG_INTEGRATION_TESTS`; when set
to true, all tests are run.
Set the environment variable to true on all nightly builds.
Build now runs in 13 minutes on my 3 year old laptop.
* Add XSD attributeGroup `smartLifeCycleAttributeGroup`
* Use it for all adapters tags
* Refactoring `AbstractChannelAdapterParser` hierarchy
* Refactoring some `MessageHandler`'s that should not have `autoStartup` & `phase`.
It is the responsibility of `AbstrctEndpoint`
* Polishing some tests according new logic
JIRA: https://jira.springsource.org/browse/INT-2998
INT-2998: Polishing
Polishing
- Reformat schemas where indentation changed
- Add SLC to the UDP inbound adapter
* Add `requires-reply` attribute for all adapters outbound gateways as `true` by default
* WS-outbound-gateway is still without it, because it has its own specific attribute `ignore-empty-responses`
* Make `requires-reply` as `false` by default for `jdbc:stored-proc-outbound-gateway` inasmuch as `jdbc:stored-proc-outbound-adapter`
doesn't have ability to configure `returning-resultset`
* add parser tests for `requires-reply`
JIRA: https://jira.springsource.org/browse/INT-2822
INT-2822 'requires-reply' for ws:outbound-gateway
Default false.
INT-2822: Polishing after rebase
INT-2822: deprecate 'ignore-empty-responses'
* Add 'requires-reply' section into What's New
INT-2822: remove 'ignore-empty-responses' from RM
INT-2822: Polishing after rebase
INT-2822: Rebased and polished
INT-2822: Rebased and polished
Add WARN within deprecated `AbstractWebServiceOutboundGateway#setIgnoreEmptyResponses`
Revert 'ignore-empty-responses'; Doc Polishing
INT-3094 Fix JSON Package Tangle
Move JSON 'discovery' classes to .support.json (used by
.json and .transformer - ObjectToMapTransformer)
INT-3094 Fix JSON Class Tangle
Separate factory methods to avoid class tangle.
Remove tight tangle between parser and mapper.
INT-3094 Fix Core Package Tangle
Move NamedComponent from .context to .support.context
(Used by .history, and .context references .store which references
.history through .util.)
INT-3094: fix 'support.json' package class-cycle
INT-3094 Polishing - PR Comments
Remove parser provider and make parsers public.
The JmsOutboundGateway's Listener container could throw
an NPE during connection recovery - while logging recovery
status.
The log attempts to include the destination description which
throws the NPE if there is no destination yet established.
Only attempt to get the description if the destination has
been established. And, even then, use a try/catch block
to prevent the NPE. Log the destination as 'null' in this
case.
Add a test case to detect the NPE by adding an ErrorHandlingTaskExecutor.
No errors should be detected with the fix in place.
JMS Outbound Gateway did not allow the specification of
a task executor on the <reply-listener/> element.
This could prevent the gateway being used with a
listener in a JEE container.
Allow setting a task-executor.
Add a bean name to the reply listener container so
that a default TE will create suitably named threads.
INT-3053 Polishing
Fix container bean name when the gateway has no
bean name.
https://jira.springsource.org/browse/INT-2951
Provide the context id in the 'Dispatcher has no Subscribers'
message.
Ease debugging when more than one context in an application.
INT-2951 Polishing
PR Comments - add quotes to context Id in log message.
Polishing
INT-2951 Polishing
Change IOS to have a simple getApplicationContextId() and
add a method getFullChannelName() to AbstractMessageChannel.
INT-2964 - JavaDoc: <emphasis> should be <em>
INT-2964 - JavaDoc: <p/> should be <p>
INT-2964 - JavaDoc polishing
* <li></li> should be wrapped in <ul></ul>
* wrap code snippets in {@code myCode()}
* change <code>false</false> to <code>false</code>
INT-2964 - Polish - Fix more JavaDoc errors
* Mockito-all dependency causes JavaDoc error. Change dependency to Mockito-Core.
The default 5 second timeout is insufficient in some cases
for the larger volume tests. In most cases, increase to
10 seconds; in some cases to 30 seconds.
Also, add code to keep the ActiveMQ VMTransport running for
the entire test class (by keeping a connection open).
Avoids cycling the broker, which can cause other issues.
Also close the context in a finally block in PipeLineJmsTests.
Clean up some whitespace violations in config files.
This, together with the try/finally block makes the commit
look bigger than it really is; suggest using 'git log -p -b'
to review.
Increase overall test timeout for PipelineNamedReplyQueuesJmsTests.
delivery-mode was deprecated (in favor of delivery-persistent)
in 2.0. Remove attribute from schema and parser.
Unfortunately, the setter on the gateway was never deprecated
so there is a possibility someone is using it programmatically,
with no knowledge that it is going away.
Deprecated the setter.
Also, added schema documentation for several attributes where
no documentation was provided.
Currently supports destination and destination name.
* Add support for replyDestinationExpression.
* Add Docs for JMS Outbound Gateway Attributes.
* Change method name for consistency.
Copy schemas, cleanup whitespace, update spring.schemas files,
update version in AbstractIntegrationNamespaceHandler.
For each schema compared the 2.2 version with the 3.0 version
(diff -w), ensuring the only difference is the import of
3.0 schemas (where appropriate) instead of 2.2.
2.2.0 changed ObjectToJsonTransformr to add content-type to
simplify AMQP applications.
However, in a JMS environment, the DefaultJmsHeaderMapper attempted
to map (and failed) to map the header, emitting a warning log entry.
JMS does not allow '-' in property names.
Add code such that:
1. If the ObjectToJsonTransformer is configured to use a
content-type of an empty String (after trimming), suppress the
addition of the header to the output message. For consistency, if
the inbound message already has a content type header, and the transformer
is configured with an empty String, remove the header.
2. Change the DefaultJmsHeaderMapper to map the MessageHeaders.CONTENT_TYPE
header (content-type) to/from a JMS compliant property name (content_type).
INT-2874 PR Comments
Move constant to JmsHeaderMapper interface and rename.
Fix failing test (explicit set content-type to "").
INT-2874 Documentation Updates
Add docbook and schema documentation clarifying the behavior
of the transformer with respect to setting the `content-type`
header.
INT-2874 Polishing - Remove Header Removal
After further discussion, we decided to not remove an
existing header, if 'content-type' is set to "".
This is because there was no way to handle the case of
NOT adding a header when none present, while retaining a
header if it was already present.
added test for empty content-type attrib and no existing header (while merging)
In many cases IDEs import into test configs Namespace-resources
with hardcoded versions of Spring & Spring Integration XSDs.
This may produce build issues with different Spring versions.
It also causes an issue during the transition to a new Spring Integration version (e.g. 3.0).
* Add Gradle task 'checkTestConfigs' to check test configs for hardcoded resources' versions.
* Add to 'test' task dependency on new task 'checkTestConfigs'
* Fix hadrcoded versions in the test configs.
JIRA: https://jira.springsource.org/browse/INT-2845
INT-2683 Tests
Expanded JMS Gateway Tests
INT-2683 First commit
Listener Container Option for Replies
INT-2683 Remove no correlation-key Option
INT-2863 Support DestName and Temp Dest
INT-2683 Add back Support No CorrelationKey
INT-2683 Fix Tests
INT-2683 Polishing
Fallback if no correlationKey and fixed reply queue.
INT-2683 Polishing
Change from SMLC to DMLC
INT-2683 Polishing
Since we changed to DMLC, we can now remove the check for
SingleConnectionFactory.
INT-2683 <reply-listener/> Namespace Support
Add <reply-listener/> subelement to JMS Outbound Gateway.
Previously, the 'selector' attribute was ignored when
a JMS Channel was pollable rather than message-driven.
Add support for MessageSelector to PollableJmsChannel.
Added support for caching reply consumers when reply queue is Temporary Queue
Added support for reuse of temporary Reply queues in the JmsOutboundGateway
Added check in ChannelPublishingJmsMessageListener to catch IllegalAccessExceptions
when Session is closed
INT-2683 first round of PR coomments
INT-2683 polish
INT-2683 polishing
code restructuring, other optimizations
INT-2683 modified 'messageCorrelationId' generation logic to be the object identity of the jmsReques as its 3-4 times fatster then String.valueOf(System.currentTimeMillis() +
- String.valueOf(System.nanoTime())
INT-2683
polished JOG to ensure that it properly manages the correlation id when used in the pipeline
added various combinations of pipeline tests
INT-2683 added copyrights to tests
INT-2683 polishing
INT-2683 polishing
INT-2683 added more pipeline tests
INT-2683 added more tests
INT-2683 polishing test
INT-2683 Polishing
INT-2683 More Pipeline Tests
INT-2683 Don't Propagate CorrelationID
Message correlation is internal to the JOG. Cannot
propagate an existing correlation id because some
downstream JOG may end up correlating (selecting) on
the same key.
INT-2683 Polishing
Fix whitespace - replace spaces with tabs.
INT-2683 polishing
reverted 2.1 schema back to its master state, fixed the typo in the test
Add general capability to advise just the handleRequestMessage
part of an AbstractReplyProducingMessageHandler.
This is to advise just the immediate operation, and not the
entire downstream flow.
Uses include:
* outbound gateway post processing
* adding retry behavior using spring-retry
* adding circuit breaker functionality
Initial commit for review.
Also need to advise simple message handlers (such as file
etc) to allow them to post-process file operations
with payload.delete(), payload.renameTo(...) etc.
INT-2250 Add Circuit Breaker Advice
INT-343 Add Retry Advice
Stateless and Stateful retry using spring-retry. Stateless
means the RetryTemplate performs the retries internally.
Stateful means the exception is thrown (e.g. to JMS container)
and the retry state is maintained by spring-retry.
INT-2215, INT-343, INT-2250 Refactoring
Factor out common abstract Advice class.
INT-2214 Catch Evaluation Expression Exceptions
If an onSuccess expression evaluation fails, add an
option so the user can decide whether such an exception is
caught, or propagated to the caller.
INT-2214 etc PR Review Polishing
INT-2214 etc Namespace Core, File, FTP
Add <request-handler-advice-chain/> to outbound endpoints.
INT-2214 etc. More Namespace Support
amqp, event, gemfire, groovy, http, ip, jdbc, jms, jmx, jpa, mail, rmi, sftp, twitter, ws, xmpp
INT-2214 etc Polishing
PR Review
INT-2214 etc Polishing
Don't catch Throwable.
Move Advice classes to handler.advice package.
Add a subscriber limit on both unicast and publish-subscribe
channels. This permits detection of inadvertent channel wiring
during context initialization.
Also add a mechanism to globally set these defaults.
Two properties are added to ChannelInitializer. If the
'channelInitializer' bean is declared before a channel, and
these properties are set, it will globally override the
default (Integer.MAX_VALUE) for these properties.
For example:
<bean id="channelInitializer" class="org.springframework.integration.config.xml.ChannelInitializer">
<property name="autoCreate" value="true" />
<property name="defaultMaxUnicastSubscribers" value="1" />
<property name="defaultMaxMulticastSubscribers" value="2" />
</bean>
will make the default max-subscribers 1 and 2 for <channel/> and
<publish-subscribe/> channels respectively.
Also applies to module channels (jms, amqp, redis).
