In many cases IDEs import into test configs Namespace-resources
with hardcoded versions of Spring & Spring Integration XSDs.
This may produce build issues with different Spring versions.
It also causes an issue during the transition to a new Spring Integration version (e.g. 3.0).
* Add Gradle task 'checkTestConfigs' to check test configs for hardcoded resources' versions.
* Add to 'test' task dependency on new task 'checkTestConfigs'
* Fix hadrcoded versions in the test configs.
JIRA: https://jira.springsource.org/browse/INT-2845
The default executor for sending messages from the IMAP IDLE
channel adapter is a single threaded thread pool.
If the default executor is used (no executor injected), shut
it down when the adapter is stopped.
INT-2820 Polishing
If using the default sendingTaskExecutor, create a new one
when restarted.
Add test to restart adapter after stop.
INT-2820 Polishing
Review comments; protect for null sendingTaskExecutor.
Previously, if an IMAP server supports IDLE, but not
RECENT, no existing messages were retrieved until a new
message arrived.
INT-2821 Polishing - Fix Race Condition
Use searchForMessages() when server doesn't support RECENT.
Simply skipping the first idle() doesn't work
because receive() closes the folder, there was a race condition
where a new message could arrive between the previous receive()
and folder.open() in waitForMessages().
Updated mock test so that first call to waitForMessages() finds
messages and does not idle(), and subsequent calls does not
find messages and goes to idle().
Also tested in the debugger against gmail which (at the time of
writing) does not support RECENT.
INT-2805 Update JavaMail to 1.4.5
There is a need to fetch the entire email message before the folder
is closed. Once the folder is closed, you cannot perform any
more operations on the message.
Prior to RC1, the message was copied, which forced an eager fetch.
Add code to copy the message.
Also, transaction synchronization operations need access to a folder
instance to perform operations, such as delete, on a message.
Add a wrapper to lazily create a folder instance in message.getFolder()
when needed.
Add documentation to explain that messages must be re-fetched before
performing transaction synchronization operations.
JavaMail 1.4.5 is now Open Source, which makes debugging much
easier.
Previously, the ability to customize the search term
strategy was added to the IMAP Idle adapter; it should
also be available to the polled IMAP adapter.
Add the attribute.
Remove some obsolete code from the parser.
Added pseudo-tx support for Mail inbound adapters
For polling adapters no changes have been made other then returning a javax.mail.Message instead of its copy so
post-tx dispositions could be performed on it.
For Imap IDLE adapter changes are simiar to the once present in SPCA where TX synchronization logic was added to ImapIdleChannelAdapter
Couple of things to note:
First IDLE receives an array of messages while Polling task receives one message which means i need to sendMessage in the Polling task in the separate thread, so for maintaining single thread semantics we have now it uses single thread executor to send Messages
Renamed MSRH to TransactionalResourceHolder since we no longer use 'source' anywhere and in the case of IDLE there is no MessageSource. Its is truly a holder of attributes we want to make available for use (e.g., SpEL)
INT-1819 Polishing
- Change TransactionalResourceHolder to IntegrationResourceHolder
- Make messageSource available as an attribute
- Allow configuration of Executor for ImapIdle adapter
- Add parser test for TX ImapIdle adapter
- Fix bundlor config for mail
- Remove top level <transactional/> element that was added to core
- Restore 'legacy' mail attributes in TX, and add schema doc
INT-1819 Mail TX Reference Docs
Add reference documentation for mail transaction support.
INT-1819 Remove 'public abstract' from interface
Modifiers are not needed on an interface.
Remove the need for pseudo-transactional element
INT-2727 PseudoTX
Add PseudoTransactionalTransactionManager
INT-2727
addressed PR comments
cherry picked previous code for mail module to eliminate breaking change
INT-2727
initial refactoring pseudo-tx support to use common configuration
INT-2727
finalizing pseudo-tx synchronization support
INT-2727 polishing
INT-2727 polishing based on PR comments
INT-2727 addressed PR comments
INT-2727 polishing
INT-2727 Remove PseudoTransactionalMessageSource
Instead of getResource, bind the resource holder before
receive() and then add attributes to the holder.
INT-2727 polishing
INT-2727 Polishing
Remove bind of #resource; add beforeCommit() test;
add TransactionTemplate tests.
Add general capability to advise just the handleRequestMessage
part of an AbstractReplyProducingMessageHandler.
This is to advise just the immediate operation, and not the
entire downstream flow.
Uses include:
* outbound gateway post processing
* adding retry behavior using spring-retry
* adding circuit breaker functionality
Initial commit for review.
Also need to advise simple message handlers (such as file
etc) to allow them to post-process file operations
with payload.delete(), payload.renameTo(...) etc.
INT-2250 Add Circuit Breaker Advice
INT-343 Add Retry Advice
Stateless and Stateful retry using spring-retry. Stateless
means the RetryTemplate performs the retries internally.
Stateful means the exception is thrown (e.g. to JMS container)
and the retry state is maintained by spring-retry.
INT-2215, INT-343, INT-2250 Refactoring
Factor out common abstract Advice class.
INT-2214 Catch Evaluation Expression Exceptions
If an onSuccess expression evaluation fails, add an
option so the user can decide whether such an exception is
caught, or propagated to the caller.
INT-2214 etc PR Review Polishing
INT-2214 etc Namespace Core, File, FTP
Add <request-handler-advice-chain/> to outbound endpoints.
INT-2214 etc. More Namespace Support
amqp, event, gemfire, groovy, http, ip, jdbc, jms, jmx, jpa, mail, rmi, sftp, twitter, ws, xmpp
INT-2214 etc Polishing
PR Review
INT-2214 etc Polishing
Don't catch Throwable.
Move Advice classes to handler.advice package.
Initial commit.
Tested with POP3 and IMAP (James) with Sample app.
Essentially moved all the flagging and deleting code
from receive() to closeContextAfterSuccess().
For non-transactional cases, this new method is
called immediately after receiving the message(s),
essentially working as before.
When run from a <transactional/> poller it is
called using TransactionSynchronization after
the transaction commits.
This behavior can be changed by setting
'symchronized="false"' on the poller, which
removes the synchronization and the update
is called immediately after the receive().
Polishing
PR Comments
Update Reference
Add re-init logic for nested chains
Add logic about nested element for AbstractChannelAdapterParser
Refactor of DefaultOutboundChannelAdapterParser
Test for non-last nested chain with some outbound-channel-adapter
Improve XSD for chain-type
Manual outbound-channel-adapter ability for chain
Integration tests for all outbound-channel-adapter within <chain>
Remove redundant 'return-value-required' attribute from <stored-proc-outbound-channel-adapter>
Add support 'expectReply' for FileWritingMessageHandler
INT-2275 polishing & refactor FileOutbound*Parser
HttpRequestExecutingMessageHandlerTests polishing
INT-2275: polishing JavaDoc
The AbstractChannelAdapterParser creates an implicit DirectChannel
if the adapter has no 'channel' attribute.
The Event, TCP, and UDP channel adapter parsers did not bind
this channel to the adapter and AC initialization failed with
'outputChannel is required'.
Further, the event schema marked the channel as being 'required',
precluding this feature.
INT-2407 Remove Channel use="required"
Parsers automatically generate the channel when none is provided.
- JMX
- JDBC
- SFTP
- Redis
- Feed
- XMPP
- Mail
- FTP
- HTTP
2. Flagged all messages that passed ImapMailReceiver with either system flag (Flag.FLAGGED) or user flag (if supported. there is a check for that as well)
3. Modified initial SearchTerm (see compileSearchTerms()) to include checking for such flags. Now both IMAP IDLE and IMAP Polling only receive messages that are NOT SEEN and NOT FLAGGED with system or user flags.
4. Folder is now always opened in READ-WRITE mode.
5. Set PEEK flag on every incoming message to 'true' before the messages are fetched.
