- Close child context before parent to publish child close event to parent
- SpelRouter FB injection
- Don't pass null Method to TransactionAttributeSource.getTransactionAttribute()
When determining candidates for direct invocation, we need
to use the target of any existing proxy (such as JMX Metrics).
Copy ServiceActivatorDefaultFrameworkMethodTests to the JMX project
and adjust to work with JMX Proxies.
INT-3185: fix for AbstractSMHFBean#checkReuse
JIRA: https://jira.springsource.org/browse/INT-3185
JIRA: https://jira.springsource.org/browse/INT-3181
INT-3181: Fix JdbcChannelMS#pollMessageFromGroup
* Add `doRemoveMessageFromGroup` and check its result.
If it is `false` then just return `null`, not polled `Message`
* Add `AbstractTxTimeoutMessageStoreTests#testInt3181ConcurrentPolling` test
and implement it for some DBs
* Make a note regarding MVCC as important in the Doc
Minor Polishing
Previously, the TcpConnectionOpenEvent was published as soon
as the socket was connected, but the TcpConnection was not yet
ready for use.
Defer publishing the event until the connection is fully
initialized and registered with the factory and thus available
for use.
Update the test cases to reflect this behavior.
Since the event is now published by the appropriate concrete
factory implementations, enhance the ConnectionToConnectionTests
to verify proper eventing with both Net and NIO implementations.
INT-3178: Add `theConnection` `ReadWriteLock`
INT-3178 Polishing
- Refactor obtainConnection() into obtainSharedConnection() and obtainNewConnection() for Net and NIO Client factories.
- obtainConnection is now common for these two factories, and overridden by the caching and failover factories.
- ReadWriteLock - double check for shared connection after lock obtained.
INT-3178: Polishing
JIRA: https://jira.springsource.org/browse/INT-3180
* Change non-existing interface in the config to existing one
* Change `@Test(expected=BeanCreationException.class)` to `try...catch` block
and check the StackTrace for appropriate, expected `Exception`
https://jira.springsource.org/browse/INT-2961
onInit() relied on subclasses calling super.onInit() to apply the
advice chain and add the BeanFactory to the MessagingTemplate.
At least one extension (smpp) failed to do this, disabling these features.
Make onInit() final and call doInit() for subclass initialization (no-op in ARPMH).
INT-2961 Polishing
- do not increase visibility of doInit in subclasses.
- remove final modifiers from doInit so user subclasses can participate in initialization if needed.
* Remove `@Ignore` from `MongoDbMessageStoreTests#testInt3153SequenceDetails()`
* Revert generic for `SessionFactory` field in `SftpServerOutboundTests`
https://jira.springsource.org/browse/INT-2629
Strategy for mapping gateway methods to map method arguments
to a message.
Default strategy works as today, but pluggable using attribute
'mapper' on <gateway/>.
A custom mapper should implement InboundMessageMapper<MethodArgsHolder>
where the MethodArgsHolder contains the Method object and the argument
values.
When using a custom mapper, the mapper is entirely responsible for
creating the Message - therefore 'payload-expression' attributes
and <header/> elements are not allowed.
INT-2629 Polishing - Javadocs
INT-2629 Polishing
- Introduce MethodArgsMessageMapper - higher level API for custom mapper.
INT-2629: Polishing docs
Previously, there was a `synchronized` block in the `GroovyScriptExecutingMessageProcessor`
to achieve thread-safety around script variables.
In addition, the parsing and executing logic was delegated to `GroovyScriptFactory`, who, in turn,
has its own `synchronized` around script parsing.
This causes a bottleneck in a messaging architecture.
* Introduce `GroovyScriptExecutor implements ScriptExecutor`
to encapsulate Groovy parsing and executing logic
* synchronize via `ReentrantLock` only when script resource `isModified()`
JIRA: https://jira.springsource.org/browse/INT-3166
INT-3166: Fixes and Polishing
INT-3166: add synchronized double check
INT-3166: Remove `GroovyScriptExecutor`
Polishing tests and logic around exceptions
Fix up some white space issues in Groovy*Tests
* Ensure close connections after tests
* Remove `Thread.sleep` where it is possible
JIRA: https://jira.springsource.org/browse/INT-3113
INT-3113: Improve `RedisAvailableRule`
* Upgrade to Spring-Data-Redis-1.1.0
* Change Redis port to default one - 6379
Polish - add smart delay to SubscribableRedisChannelTests.pubSubChannelTest
https://jira.springsource.org/browse/INT-3069
Provide a mechanism to specify headers and payload-expression that can
be applied to all methods in the gateway.
- Headers defined as 'default' are globally applied to all gateway methods.
- Also supports 'default-payload-expression'.
- Headers defined on a specific method override the global settings.
- An `@Header` in the interface is overridden by a specific <header/> for that method (current behavior)
- An `@Header` in the interface is NOT overridden by a <default-header/>
- Add 3 new SpEL variables:
-- #methodName (synonym for #method - deprecated)
-- #methodString (a string representation of the method showing return type and arg types)
-- #methodObject (the Method object)
<int:gateway id="sampleGateway"
service-interface="org.springframework.integration.gateway.GatewayInterfaceTests.Bar"
default-request-channel="requestChannelBaz">
<int:default-header name="name" expression="#methodName"/>
<int:default-header name="string" expression="#methodString"/>
<int:default-header name="object" expression="#methodObject"/>
<int:method name="baz">
<int:header name="name" value="overrideGlobal"/>
</int:method>
</int:gateway>
INT-3069 Polishing - PR Comments
- Remove extra 'method' variables, just provide `gatewayMethod`.
- Parser improvements
- Schema now enforces default-header elements to precede method elements
- Doc polishing
When recursing, the returned filenames are relative to
the top level directory.
INT-3172 (S)FTP - Add Recursion to MGET Command
https://jira.springsource.org/browse/INT-3172
INT-3172 Polishing
- PR Comments
- Add Tests for SFTP (tested with Mock and real SSH)
- Enhance test to ensure subdir is in 3rd file retrieved
- Exclude "special" directories ('.' and '..') from recursion
INT-3172 Make FtpServerRule Safe For Concurrency
Previously the port was static.
- Make the port an instance variable
- Channel the `@ ClassRule` to a `@ Rule`
- Register an appropriate DefaultFtpSessionFactory bean declaration
INT-3172 Polishing; Docs
- Rename FtpServerRule to TestFtpServer
- Remove restriction on filters for MGET
- Add test for filtered MGET
- Reference docs, what's new
INT-3172 More Polish
- Fix type in reference
- Fix error message now that filter is allowed with MGET
- Remove test for filter with MGET (now valid)
INT-3172: Fix tests and typos
INT-3172: this.remoteFileSeparator for recursion
* Add `local-directory-expression` to (S)FTP Outbound Gateways
* Add `FtpServerRule` to Apache Mina embedded FtpServer
* Add tests for (M)GET and `local-directory-expression`:
FTP tests uses `FtpServerRule`, SFTP tests need testing on real SFTP server
JIRA: https://jira.springsource.org/browse/INT-2866
INT-2866: Documentation
INT-2866 Polishing
- Remove leading /
- Change \ to / in invalid test
- Clean up after sftp
Tested with real SSH.
INT-2866 Polishing - Add Mock SFTP Test
Run with -Dspring-profiles-active=realSSH to run with a real SSH server.
Assumes ftptest/ftptest account on localhost with the following directory tree in the user's root...
$ tree sftpSource/
sftpSource/
├── sftpSource1.txt
├── sftpSource2.txt
└── subSftpSource
└── subSftpSource1.txt
INT-2866: Polishing
INT-2866: change `remotePath` to `remoteDirectory`
Doc Polishing.
byte[] and String payloads were written to a temporary file.
If the same message is transferred to two different destinations
concurrently, one of the adapters could remove the temporary
file while the other was using it.
Don't use a temporary file for these payloads, simply use the
payload byte[] [or a String.getBytes()] as the InputStream
passed to the Session.write() method.
Polishing
Polishing - Add WARN For Missing File
+ Test
JIRA: https://jira.springsource.org/browse/INT-3091
Previously, there was no logic to check, if a JSR223 script
was modified should be refreshed from the external resource.
* Fix `RefreshableResourceScriptSource` to take care of refreshing
on call `isModified()`
* Add `scriptSource.isModified()` before getting script text
* Introduce `ScriptSourceFactoryBean` to avoid I/O operations, when
there is need to refresh script resource - `refreshDelay < 0`
JIRA: https://jira.springsource.org/browse/INT-3164
INT-3164: change the refresh mutation logic
Remove factory bean - no longer needed.
This commit updates Spring Integration to depend upon Spring 4, making
use of the message types that have moved from Spring Integration into
Spring's new spring-messaging module.
The default message converter no longer supports conversion of a
message that is null, throwing an IllegalArgumentException if an
attempt is made to convert null. Furthermore, GenericMessagingTemplate
does not support sending null, again throwing an
IllegalArgumentException. Previously, MessagingTemplate had no-oped an
attempt to send null.
ConcurrentAggregatorTests and AggregatorTests both had a single test
that was specifically testing the behaviour of an aggregator that
returns null for its message. These tests have been removed.
CorrelatingMessageHandlerTests have been updated to specify some
additional behaviour for its mocks so that null messages are not
returned.
These are the only functional changes that have been made. All other
changes are simply for moving to the repackaged and/or renamed types.
In the move to being part of core Spring, a number of constants and
header accessor methods have moved from MessageHeaders to
MessageHeaderAccessor. This commit continues this pattern for
the enterprise integration headers that are specific to Spring
Integration. A new class, EiMessageHeaderAccessor, has been created.
This class provides constants and methods for working with SI-specific
headers. The main code and tests have been updated to use this new
class.
Previously, when an exception occurred on a send, the
connection was not forcibly closed. When using a
CachingClientConnectionFactory, this prevented the connection
(albeit stale) from being returned to the cache.
Perform a forced (physical) close whenever a send fails.
Add test cases for both Net and NIO implementations, using
a CCCF, to verify the connection is returned to the pool so
the closed state can be detected on the next retrieval, causing
a refresh.
Also, change the synchronization in the NIO send to
synchronize on the socketChannel, not the mapper (which is
shared).
JIRA: https://jira.springsource.org/browse/INT-3163
From SPR 3.2.x the 'the path mapping' is **required** for `Controller`,
But with SI it is OK, because we can configure HTTP Inbound Endpoint via `HttpRequestHandlerServlet`.
So, add check if `requestMapping.getPathPatterns()` has values and don't register HTTP Inbound Endpoint
as `HandlerMethod` and just rely on user choice.
JIRA: https://jira.springsource.org/browse/INT-2312
INT-2312b: Polishing
The general idea is to use Spring-MVC as much as possible.
* Introduce `RequestMapping`, `IntegrationRequestMappingHandlerMapping`
* Introduce XSD nested element `<request-mapping>` for HTTP Inbound Endpoints
* Introduce `inboundCommonAttributes` XSD attributeGroup for HTTP Inbound Endpoints
* Introduce `IntegrationNamespaceUtils#createExpressionDefIfAttributeDefined` & `IntegrationNamespaceUtils#createDirectChannel`
* Remove deprecated `name` attribute
* Remove `UriPathHandlerMapping` as superseded by `IntegrationRequestMappingHandlerMapping`
* Add documentation for `<request-mapping>`
- Add description to Reference Manual about `<request-mapping>`
* Add documentation to section 'What's new'
* Add additional test for `<request-mapping>`
JIRA: https://jira.springsource.org/browse/INT-2312, https://jira.springsource.org/browse/INT-2619
Additional changes:
* INT-2528 Remove deprecations in HTTP module
- JIRA: https://jira.springsource.org/browse/INT-2528
* Add Jackson 2 support for HTTP-inbound
* Using Jackson 2 HttpMessageConverter if Jackson 2 is available in classpath
* Make `RequestMapping` public
* Introduce `HttpContextUtils` and move `HANDLER_MAPPING_BEAN_NAME` to it
* Revert and deprecate public API
* Improve JavaDocs
* Improve Reference Manual
Thanks also to Biju Kunjummen for his incorporated commit.
* Add to `LongRunningIntegrationTest` ability to read `System.properties`
Note, ENV property 'RUN_LONG_INTEGRATION_TESTS' has a preference in case of value `true`
* Add Gradle task `testAll`
* Upgrade to Gradle 1.7
* Improve build performance by adding 'inputs'/'outputs' to some tasks
JIRA: https://jira.springsource.org/browse/INT-3155
Polishing
Remove inputs/outputs.
Polish RouterConcurrencyTest.
Use the Spring Framework stylesheet for javadocs.
Fix 3 missing package-info files.
(Aside: remove cache-sessions from 2 @Ignored test case configuration files).
